Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

Changed cams and fixed vacuum leak....Need a retune?

Thread Tools
 
Search this Thread
 
Old Apr 13, 2011 | 11:20 PM
  #1  
My03evo's Avatar
Thread Starter
Evolved Member
iTrader: (1)
 
Joined: Dec 2010
Posts: 696
Likes: 0
From: Toms River
Arrow Changed cams and fixed vacuum leak....Need a retune?

I just got my engine back together and the only tune affecting change I did was change my HKS cams (272's?) to GSC S2's. Wondering how necessary it is to get a retune? When the car was running the tune was dead on and when I took it apart I found a vacuum leak (fp solenoid was venting open) so the vacuum leaks will be fixed thus making it a hair richer and maybe even help with the additional air from the bigger cams?

I won't be getting into much boost if any at all because I put in a new clutch and want to break it in first and I do have a wideband to see how much the afr will be affected but just want to get some comments on this, I'm new with boosted imports so not sure if anything else gets affected I need to know about.
Thanks
Reply
Old Apr 14, 2011 | 12:32 AM
  #2  
05VIII's Avatar
Evolved Member
iTrader: (17)
 
Joined: Jun 2005
Posts: 862
Likes: 2
From: Dallas
Definitely get a new tune but I'm sure you will be fine for now. I did the same thing by swapping out hks cams to the GSC s2's and my af stayed around the same. I have picked up some knock recently but I believe its from a bad batch of e85. Once the weather warms up I'll be going for a retune.
Reply
Old Apr 14, 2011 | 03:50 AM
  #3  
bonsuz01's Avatar
Evolving Member
iTrader: (3)
 
Joined: Oct 2010
Posts: 311
Likes: 0
From: Grand Prairie, TX
I would get it retune.. I'm kind of like you, new to the boosted Turbo..

Good luck ,
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
dsmtalontsi95
Evo General
13
Aug 25, 2018 05:44 AM
Evo1001
Evo Engine / Turbo / Drivetrain
5
May 30, 2017 06:42 PM
Appauldd
ECU Flash
452
Sep 21, 2015 08:39 AM
Brandon Robblee
ECU Flash
13
Sep 8, 2015 09:44 AM
nawaz
EvoM New Member / FAQs / EvoM Rules
9
Jul 9, 2008 12:01 AM




All times are GMT -7. The time now is 01:02 AM.