how clean is the oil literally coming from the filter housing? is a second filter reallly needed? I run wix oil filters...

 

Good question Ratster.

 

yeah im not sure if its long enough but if you got an inline filter and another -4an line you would still be under 100 bucks.

 

Thanks for sharing, dude! You the Man

 

Pm me if anyone wants a bspt -jic

 

How did this thing turn out? I've been pricing out everything as well. Even with the actual FP inline filter ($70) and lines and fittings sourced off ebay, my total looks about $150 - $175 with shipping. There's nothing wrong with ebay ss braided lines right?

 

Does anyone know the banjo bolt size for the oil feed line on the head? 10mm x 1.25 or 12mm x 1.25?

 

10x1.25, the banjo for the oil inlet on the turbo is 12mm

 

Works good using it now on my 71hta..

 

what kind of setup did you use off the filter housing? I have a 3/8bspt to 1/8npt adapter already. Did you use this adapter too, or something else to go from bspt to the AN line? Also, did you use a 120* bend like the FP line or something else (90* seems to be easier to find)? Thanks..

 

oops, just saw u used a bspt to jic adapter. But my question about the bend on the ss braided line still stands...

 

I used a 120

 

I thought I was all good to go... I had the oil feed line on the turbo when i bought it from a friend. Get to where i have to hook up the oil feed line to the filter housing... Looks like mu buddy cut the line. Niw I don't have the fitting. I hope I find this ****!

 

What exactly are you needing? I have some pieces I don't need anymore and also have a MAP oil feed line with everything with it for sale.

 

I have the -4 line... I need to get the fittings needed to hook up to the oil filter housing