Noise after timing belt change
#1
Noise after timing belt change
I have an odd noise at idle after my timing belt change. almost sounds like something isnt lubed. Checking PS fluid and it full. No leaks So stumped.. Any thoughts?
http://s143.photobucket.com/albums/r...t=23a2b277.mp4
http://s143.photobucket.com/albums/r...t=23a2b277.mp4
#7
Evolved Member
iTrader: (4)
Serpentine idler and tensioner pulley.
Power steering pulley, AC Pulley.
Timing belt idler and tensioner pulley.
If all of those are new, make sure you have proper tension on the timing belt. The grenade pin should slide in and out without friction after rotating the engine by hand a few times and letting it sit for up to a few hours. Took me like 5 tries to get this right last time I did mine.
Last edited by fre; Mar 30, 2012 at 05:56 PM.
Trending Topics
#13
Evolved Member
iTrader: (21)
You'd have to look at the part number they ordered; there's a different one for the updated bracket
1091A133 is the part number for the new bracket i believe
https://www.evolutionm.net/forums/ev...elt-video.html has more info
1091A133 is the part number for the new bracket i believe
https://www.evolutionm.net/forums/ev...elt-video.html has more info
#14
Thank you. Will look
You'd have to look at the part number they ordered; there's a different one for the updated bracket
1091A133 is the part number for the new bracket i believe
https://www.evolutionm.net/forums/ev...elt-video.html has more info
1091A133 is the part number for the new bracket i believe
https://www.evolutionm.net/forums/ev...elt-video.html has more info
#15
Totally stumped. Everything has been replaced. Tensioners pulleys and engine bracket. Noise is still there. And only presents its self at warm idle. So the noise doesnt start till the car gets warm. Here is a pic of where the noise is coming from
seems like its right around that thin piece of metal.. LMK what i am missing
seems like its right around that thin piece of metal.. LMK what i am missing