Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

Evo-9 full modified 6766 and dyno results.

Thread Tools
 
Search this Thread
 
Old Jun 19, 2012 | 01:54 AM
  #1  
vagelisix's Avatar
Thread Starter
Newbie
 
Joined: Jul 2007
Posts: 50
Likes: 0
From: Athens
Evo-9 full modified 6766 and dyno results.

Hi from sunny greece i just wanted to share with you some photos from my car,my name is vaggelis and i am from greece athens, i hope you like them and if i have any writing mistakes sorry for that guys.

Engine:2L 4g63,
Head cosworth cnc with mivec
Cams tomei
Pistons je 85,5mm
Rod carrillo 150mm ,with rod bolt
Crank K1 88mm
Ignition spark tech coil on plug with cdi pro
Intake manifold AMS f1-I
Exhaust manifold full race front face,with 2 MVS 38mm
Turbo precision 6766
Intercooler AMS
Fuel kit AMS
Clutch kit Tilton 7,25mm
Transmission dog box 5 speed ppg
wheels enkei rpf-1 black with tires toyo r888 235-45-17
Suspension tein type HG Evo
AP-racing 5000+ front brake system
Girodisc rear rotors
Ecu Autronic Sm-4 and tunning from my good friend Greg, ACE MOTORSPORT MD DYNO.
All the engine work it's from my good friends Vlassis and Giannis brothers GTR TUNING
And i want to say thank you to MAPerformance because they are exceptional dealers,and i have purchased alot of items from this guys.



















Thank you that's all guys

Last edited by vagelisix; Jun 25, 2012 at 12:34 PM.
Reply
Old Jun 19, 2012 | 01:57 AM
  #2  
Yme's Avatar
Yme
Evolved Member
iTrader: (62)
 
Joined: Jul 2005
Posts: 585
Likes: 0
nice setup!!
Reply
Old Jun 19, 2012 | 02:02 AM
  #3  
vagelisix's Avatar
Thread Starter
Newbie
 
Joined: Jul 2007
Posts: 50
Likes: 0
From: Athens
Thank you!!
Reply
Old Jun 19, 2012 | 05:21 AM
  #4  
NJ9MR's Avatar
Evolved Member
FCOTM Winner
15 Year Member
Shutterbug
Liked
iTrader: (56)
 
Joined: Jul 2006
Posts: 1,235
Likes: 43
From: N.New Jersey, SoCal & Tokyo, Japan
Your car is amazing! I also have an Evo IX-MR/Mivec. Can I ask you how you painted/powder coated your INTAKE CAM Gear? I was told that you couldn't powder coat it because there is a rubber dampener in there and it would get destroyed in the powder coating process...I also have an HKS Exhaust side cam gear. Best of luck!

Last edited by NJ9MR; Jun 19, 2012 at 05:24 AM.
Reply
Old Jun 19, 2012 | 05:24 AM
  #5  
boostleak's Avatar
Newbie
 
Joined: Jun 2012
Posts: 43
Likes: 1
From: 4 door saloon
Great looking car
Reply
Old Jun 19, 2012 | 07:24 AM
  #6  
vagelisix's Avatar
Thread Starter
Newbie
 
Joined: Jul 2007
Posts: 50
Likes: 0
From: Athens
Originally Posted by NJ9MR
Your car is amazing! I also have an Evo IX-MR/Mivec. Can I ask you how you painted/powder coated your INTAKE CAM Gear? I was told that you couldn't powder coat it because there is a rubber dampener in there and it would get destroyed in the powder coating process...I also have an HKS Exhaust side cam gear. Best of luck!
Thank you!!!! you must open the cam gear and then you take out the rubber and then you can do the coating and after you must put all the parts in and the rubber to close it.
Reply
Old Jun 19, 2012 | 07:30 AM
  #7  
joeyhauser's Avatar
Evolving Member
iTrader: (4)
 
Joined: May 2008
Posts: 167
Likes: 0
From: overseas
I think I watched a youtube video of this car last night? You have a video up on there? I think the video had a group name to it something like EVO......something.......Greece?

Either way, nice car man
Reply
Old Jun 19, 2012 | 07:38 AM
  #8  
NJ9MR's Avatar
Evolved Member
FCOTM Winner
15 Year Member
Shutterbug
Liked
iTrader: (56)
 
Joined: Jul 2006
Posts: 1,235
Likes: 43
From: N.New Jersey, SoCal & Tokyo, Japan
Originally Posted by vagelisix
Thank you!!!! you must open the cam gear and then you take out the rubber and then you can do the coating and after you must put all the parts in and the rubber to close it.
Thanks for the BIG help! Take care of that killer car you have!
Reply
Old Jun 19, 2012 | 07:50 AM
  #9  
Solenoid's Avatar
Evolving Member
Veteran: Marine Corps
10 Year Member
Liked
Community Favorite
 
Joined: Feb 2011
Posts: 253
Likes: 5
From: Laguna Beach California
Hi Vaggelis

Have you had any work done by ET (Extreme Tuners) & what is your opinion of them?
Be great to have you post this up in the Show & shine or the Engine Dyno forum with embedded photos & better pics. Posting up in the General section will get buried too soon

Love what youve done & would love to drive something like this one day

BTW, Hope you guys stay in the EURO zone.

Mike
Reply
Old Jun 19, 2012 | 08:00 AM
  #10  
vagelisix's Avatar
Thread Starter
Newbie
 
Joined: Jul 2007
Posts: 50
Likes: 0
From: Athens
Originally Posted by joeyhauser
I think I watched a youtube video of this car last night? You have a video up on there? I think the video had a group name to it something like EVO......something.......Greece?

Either way, nice car man
Hi yes i have some videos up there!! Thank you
Reply
Old Jun 19, 2012 | 08:06 AM
  #11  
1japdsm's Avatar
Newbie
iTrader: (25)
 
Joined: Jan 2012
Posts: 26
Likes: 1
From: Long island
Beautiful... Good job with it.
Reply
Old Jun 19, 2012 | 08:11 AM
  #12  
bestsales's Avatar
Newbie
iTrader: (1)
 
Joined: May 2012
Posts: 17
Likes: 0
From: Florida
Such a nice car!! Way to go
Reply
Old Jun 19, 2012 | 11:58 AM
  #13  
vagelisix's Avatar
Thread Starter
Newbie
 
Joined: Jul 2007
Posts: 50
Likes: 0
From: Athens
Thank you guys!!!!
Reply
Old Jun 19, 2012 | 12:03 PM
  #14  
Solo-Wing06's Avatar
Evolving Member
iTrader: (1)
 
Joined: Dec 2010
Posts: 104
Likes: 0
From: South Texas
its good to see the Evo being aprreciated and modified to the extreme overseas, super clean engine bay btw ,best of luck!
now go kick some exotic lamborghini butt.
Reply
Old Jun 19, 2012 | 01:06 PM
  #15  
vagelisix's Avatar
Thread Starter
Newbie
 
Joined: Jul 2007
Posts: 50
Likes: 0
From: Athens
Hi can the admin please send this thread to the Show & shine section please. Thank you
Reply



All times are GMT -7. The time now is 10:04 PM.