recently bought a precision 46mm wastegate and now i need a dump tube. looked all over the internet and couldnt find anybody that sells a 46mm v-band dump tube. anybody selling one or kno where to get one? i found a 44mm v-band dump tube for a subaru setup and im not to sure if thatll work . i need inputs thanks in advance

 

i would try full race. they should be able to fab one up or at least give you the 44mm piping to bend and make your own. if all else fails i know on my honda i used one of the old pieces of a manifold. it was a cheap obx manifold 4-2-1 style. the manifold was two pieces the top part was where it was 4 runners going to two, and what would be the downpipe was 2-1. i cut the flange off and sawed the two pieces of pipe off the 2-1 section, and they were close enough to 44mm to use. kinda ghetto but it worked and was free since it was being replaced