Notices
Evo Engine / Turbo / Drivetrain Everything from engine management to the best clutch and flywheel.

no oil pressure!!!!!!!!!!

Thread Tools
 
Search this Thread
 
Old Nov 6, 2014 | 01:27 PM
  #1  
dsmgabe's Avatar
Thread Starter
Newbie
 
Joined: Aug 2014
Posts: 1
Likes: 0
From: orlando
no oil pressure!!!!!!!!!!

problems first started after balance shaft belt broke. went ahead and replaced oil pump and balance shaft bearings as a precaution.
During next start up oil pressure when to 30psi and thendropped off. performed several attempts at priming oil pump manually with powerdrill and also with an air pump forcing oil in and out of oil pump with nosuccess. then decided to remove oil pan again with girdle and foundextreemlyslight wear on one of the thrust bearings : the one closet to oil pump.believing that was the issue i went ahead and replaced all the lower end bearings.upon startup it still had no oil pressure after priming. ive checked oilsquirters, reprimed the pump, replaced all gaskets, bypassed oil cooler,swapped out the oil sending unit for a known good one, still no luck.

for some reason pressure returned only once while priming the pump
to over 60psi but went back to zero after timing belt was reinstalled.
Reply
Old Nov 6, 2014 | 01:40 PM
  #2  
xXANCHORMONXx's Avatar
Evolved Member
iTrader: (15)
 
Joined: Jan 2012
Posts: 703
Likes: 3
From: San Bruno
Perhaps the shaft in the oil pump broke?
Reply
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
Inprogress
For Sale/WTB - Engine / Drivetrain / Power
6
May 15, 2014 06:43 AM
Inprogress
For Sale - Engine / Drivetrain / Power
1
May 15, 2014 06:42 AM
hiboost2.0
Evo Engine / Turbo / Drivetrain
16
Jan 2, 2014 08:10 AM
cij911
Evo Engine / Turbo / Drivetrain
11
Nov 14, 2011 08:18 AM
jbigelow
Evo Engine / Turbo / Drivetrain
14
May 3, 2005 08:46 AM




All times are GMT -7. The time now is 10:16 AM.