I got my shortblock back and now I have to assemble the front case. This was a miscommunication with my builder and mainly my fault. I didn't take these parts off so I'm not sure where they all go. I did some searching but didn't find anything "How-to" like. Can someone point me in the right direction to assemble a front case I didn't disassemble? ie bolt lengths and location, order, torque specs? Im mechanically inclined enough to do this I feel. I pulled the motor/trans/TC and removed the trans from the motor. Any help is appreciated. THANKS

 

No insight?

 

http://www.evoscan.com/vehicle-manuals


You can download the service manual here, it should have that info for you. Make sure you measure the clearances on the oil pump gears to ensure it doesn't need replaced.

 

I plan on taking it out and inspecting for wear, but I will measure the clearances as long as it gives me that info lol Thanks!

 

The manual has clearances listed. You'll need a straight edge and feeler gauges.

 

I didn't see anything in the link he provided, Ill look again

 

The link I gave has a link to down load a zip file which has the full service manual for the car. It's in there.