Title says it all, what are the flywheel diameters on the Evos? I read on here that the 6 is smaller by like 10mm...but that doesn't help me. I'm in the process of building the first Mid Engine 4G63 Porsche. And im planning on keeping the Getrag 6Spd but I know their flywheels are kinda small... I'm currently having an adaptor plate 3D Cut on a cnc machine. But we're in the middle of scans of the block and transmission, need to figure out what flywheel/clutch I'm going to use. MITSUBISHI or Porsche.

Thanks to anyone that can get me this information. I've tried searching but can't seem to find a number.

 

flywheel / ring gear diameter is 290 mm... stock clutch plate is 240 mm

 

You may not be the first, but this might have some answers to some of your questions. Good luck & remember to post up some pics.

https://www.evolutionm.net/forums/pr...wap-again.html

 

That's rear engine, not mid engine. Using a G50 transmission. My car is Mid Engine using the G86 transmission. Much different thing. And as far as I can tell it will be the first of its kind. I did already know Kenedy made an adaptor plate and flywheel but it's for the rear engine older Porsches. I tried to discuss the possibility of doing something for the G86/96 on up Porsches since the bellhousing and flywheels are different. They practically hung up on me and blocked my email address.

And I will. When I can finally get this project off of the drawing board. I'm a picture ***** so I'm sure it will become known. Building a 2.4L with a Mivec Head. Gonna be good times.

 

For which car? Evo 6 or 7+?

 

e7,8,9, sorry for not being clear..

 

Nice, thank you. So now to confirm the size of the older Evos and AWD DSMs.