Kelford 280's

Reply Subscribe

Thread Tools

Search this Thread

Feb 7, 2017 | 04:19 AM

1SlowRS

Thread Starter

Newbie

Joined: Oct 2014

Posts: 99

Likes: 1

From: Indiana

Kelford 280's

What would be the best vavle spring and retainers to go with for these cams? This setup with be for dd

Feb 7, 2017 | 03:23 PM

V.8MR

EvoM Guru

iTrader: (6)

Joined: Nov 2006

Posts: 2,249

Likes: 236

From: STL

Don't think you can go wrong with Supertech. Its what I run.

Feb 7, 2017 | 03:41 PM

Pal215

EvoM Guru

iTrader: (12)

Joined: Apr 2008

Posts: 2,925

Likes: 361

From: San Diego, CA

GSC 5041 or Supertech Duals because they are reliable springs that both meet the lift requirements of those cams without binding. You will have more valvetrain harmonics with the supertech duals, but I have used them with a high lift cam (GSC R2) without issues for 2000 miles so far. The GSC 5041 will give you plenty of valve stem seal clearance if that's what you're looking for.

But hey, I may not know what i'm talking about.

-pal215

Last edited by Pal215; Feb 7, 2017 at 03:47 PM.