Mauricio Evo IV

iTrader: (1)

I have a doubt about specs of a new turbine housing that i bought.

Few days ago I blown my 6266 turbo and bought a new (used) 6266 with not stickers or something that said its a 6266 turbo.

In apperiance its the same like mine, but it has a different number in the turbine housing.
The old one have in the T3 flange THGT2-66V. I think (obviously) 66mm Exd.

The new one have in the T3 flange THGT2-35R.

I search with that number (THGT2-35R) and nothing. I want to know if that turbine housing have the same specs like 6266 turbine housing.

Someone expert in turbos can help me?

LetsGetThisDone

iTrader: (1)

That size precision turbo is based on the garret 35r frame size. So, you the turbo you picked up may have a 35r housing machined for the 66mm wheel.


You could always call precision and ask.

ExViTermini

iTrader: (25)

Have a micrometer?

Bust it out and get to measuring. Quickest and easiest way.

Mauricio Evo IV

iTrader: (1)

I have. The problem is the turbo is already installed... I will see if I take off to measuring... thanx!

Mauricio Evo IV

iTrader: (1)

Thanx man. I sent an email few days ago and no response...

Mauricio Evo IV

iTrader: (1)

problem solved. The guys from PTE anser my question.
They told me the turbine that I have its a direct replacement turbocharger for 68mm turbine wheel.
its 2mm bigger that 66mm turbine wheel. I hope no more lag with that in my car.

Thanx to all!