Turn motor with starter
Jun 23, 2019, 01:17 AM
#1
Newbie
Thread Starter
[Help] Turn motor with starter??
My Evo’s been sitting for 8 months without starting, Ofcourse I’ll change fluids when I get back back, I am curious about turning the motor over by unplugging the coil packs to get oil around so it won’t fire dry, Will this cause any significant damage? Also will
be adding marvel mystery oil on my chambers prior.
be adding marvel mystery oil on my chambers prior.
Last edited by evolved310; Jun 23, 2019 at 01:41 AM. Reason: Title correction
Jun 23, 2019, 06:06 AM
#2
My Evo is sitting around 6 months every winter. All I do is add new oil and prime the oil system by removing the crank position sensor plug before starting (cranking without firing).
It always fires and runs like it was only sitting for 1 day.
Video about the priming start at 8:36:
It always fires and runs like it was only sitting for 1 day.
Video about the priming start at 8:36:
The following users liked this post:
evolved310 (Jun 23, 2019)
Jun 23, 2019, 09:32 AM
#3
EvoM Guru
iTrader: (1)
Just start it.
The following users liked this post:
evolved310 (Jun 23, 2019)
