New member here. Sorry if this has been covered already.

Have any photos of the smaller wing been released or posted anywhere yet?

Thanks for any information!

 

The small wing is the same exact one on the OZ and LS Lancers.

EDIT: Here some pics of that small GT wing on the Evo-

 

That was quick! Thanks for the information LE!

This brings up a new question for me ......

Do both styles of wings share the same mounting? Can they be swapped over without drilling new mounting points?

Might be a lot of wing swapping with the members of this board if this can be done?

 

Thanks again LE! The smaller wing is much more to my liking!

Gotta run a low profile.

 

As for the small wing sharing the same mounting with the evo wing, yes they do share the same mounting-except for the middle mount that the small wing has. They could be swapped without drilling any other mounting hole, but you gotta fill the middle mount that the small wing left.

Sure Anytime

 

If you did replace the small wing with the big wing there would be two holes on the trunk where the center piece of the small wing was, on the other hand putting a small wing where a big wing once was would require the drilling of holes. The mounting should be the same seeing as the would have to make trunk lids specifically for an big or small wing before they were fitted on a car. Those are my thoughts on the topic.

 

It actually looks okay with the small wing. I thought it would have been pretty nasty looking. But I still prefer it with the big wing.