EvolutionM - Mitsubishi Lancer and Lancer Evolution Community

Notices
Evo General Discuss any generalized technical Evo related topics that may not fit into the other forums. Please do not post tech and rumor threads here.
Sponsored by: RavSpec - JDM Wheels Central

All Part Number Request Go Here

Thread Tools
 
Search this Thread
 
Old Sep 17, 2007 | 06:38 PM
Share
  #2056  
BaLListic_EVO's Avatar
BaLListic_EVO
Evolved Member
iTrader: (19)
 
Joined: Dec 2003
Posts: 1,175
Likes: 0
From: NC
Originally Posted by Autoilluminate
Didn't see it in the list
I need the part number for the stock rear sway bar brackets.
See picture:

It appears that the right rear pn's are
MB856472
MB856471

i cant seem to locate the ones for the left rear
Reply
0
Old Sep 17, 2007 | 07:12 PM
Share
  #2057  
ryan0414's Avatar
ryan0414
Newbie
iTrader: (1)
 
Joined: Mar 2007
Posts: 49
Likes: 0
From: San Diego
nozzles on the hood
I want to buy the nozzles on the hood, but my dealer told me that I couldn't buy the nozzles without the hoses. Is that true? or is there any individual part # for just the nozzles? I don't want to pay $35 for the whole thing.
Reply
0
Old Sep 18, 2007 | 09:04 AM
Share
  #2058  
RussellM's Avatar
RussellM
Plat Vendor
iTrader: (256)
 
Joined: Jul 2007
Posts: 3,412
Likes: 4
From: Olympia, WA
Originally Posted by cssaddictm4
I can definitely wait, as we are about to pull the motor this week. Looking forward to the pic. Thanks, Blake

Here are the photos. I took a picture of the plugs too so that you could make sure they match your transmission.


Name: harness1.jpg Views: 0 Size: 107.0 KB

Name: harness3.jpg Views: 0 Size: 53.0 KB

Name: harness5.jpg Views: 0 Size: 48.1 KB

Name: harness5.jpg Views: 0 Size: 48.1 KB
Attached Images
File Type: jpg
harness5.jpg (48.1 KB, 0 views)
Reply
0
Old Sep 18, 2007 | 09:30 AM
Share
  #2059  
RussellM's Avatar
RussellM
Plat Vendor
iTrader: (256)
 
Joined: Jul 2007
Posts: 3,412
Likes: 4
From: Olympia, WA
Originally Posted by justchil
I'm looking for the nuts that go on the rear ball joints. Specifically the assist arm and trailing arm ball joints (I think they are all the same).

I doubt it but if the ball joints are available for the trailing and assist arms I need those.

Also the nuts that go on the bolt that holds the rear shock to the control arm, the bolts and nuts that go on the assist arm connecting it to the subframe.

I can provide pics if needed... thanks in advance!
I think I put the numbers for everything you requesting in the link for pricing, but look at the CAPS illustrations to make sure I got them all. Also, this should give you an idea of what all is in there, let me know if you need any other parts.


http://www.mitsubishiparts.net/cart/...*4+MB809343*2+

Name: RearSuspension-EVO-1.jpg Views: 0 Size: 78.3 KB

Name: rearsuspension2-evo.jpg Views: 0 Size: 76.9 KB
Reply
0
Old Sep 18, 2007 | 09:46 AM
Share
  #2060  
budlong's Avatar
budlong
Evolved Member
iTrader: (2)
 
Joined: Oct 2003
Posts: 512
Likes: 0
From: norcal / socal
any word on the fuel pump p/n for the VIII and IX?
thanks
BUDLoNG
Reply
0
Old Sep 18, 2007 | 09:46 AM
Share
  #2061  
RussellM's Avatar
RussellM
Plat Vendor
iTrader: (256)
 
Joined: Jul 2007
Posts: 3,412
Likes: 4
From: Olympia, WA
Originally Posted by ryan0414
I want to buy the nozzles on the hood, but my dealer told me that I couldn't buy the nozzles without the hoses. Is that true? or is there any individual part # for just the nozzles? I don't want to pay $35 for the whole thing.
On an EVO VIII you do have to buy the hoses to get them, but on the IX you dont.

Here is a link with pricing, etc. I could ship these to you for free as well. I would have to order them in though.

http://www.mitsubishiparts.net/cart/...37745+MR537746
Reply
0
Old Sep 18, 2007 | 11:18 AM
Share
  #2062  
RussellM's Avatar
RussellM
Plat Vendor
iTrader: (256)
 
Joined: Jul 2007
Posts: 3,412
Likes: 4
From: Olympia, WA
Originally Posted by RussellM
Ah gotcha. Ill post them up on Tuesday when Im back in the office. The part number will not match what is on the denso part though. I know this for a fact. It will have a denso part number on it rather than a Mitsubishi and vice versa.
IX - http://www.mitsubishiparts.net/cart/?id=571&pn=MN176728



VIII - http://www.mitsubishiparts.net/cart/?id=571&pn=MR571544
Reply
0
Old Sep 18, 2007 | 12:53 PM
Share
  #2063  
budlong's Avatar
budlong
Evolved Member
iTrader: (2)
 
Joined: Oct 2003
Posts: 512
Likes: 0
From: norcal / socal
i think everybody who tries to answer this is missing the point of the question.

I have an evo fuel pump... and i am not sure if it is the higher flowing evo 9 pump, or if its an evo 8 pump. The only part number listed on the fuel pump is a denso p/n.

Can anyone give me the DENSO p/n for both the evo8 and evo 9 fuel pump?

maybe someone has installed an aftermarket fuel pump and has their oem lying around they can check...

thanks
BUDLoNG
Reply
0
Old Sep 18, 2007 | 12:56 PM
Share
  #2064  
ryan0414's Avatar
ryan0414
Newbie
iTrader: (1)
 
Joined: Mar 2007
Posts: 49
Likes: 0
From: San Diego
Originally Posted by RussellM
On an EVO VIII you do have to buy the hoses to get them, but on the IX you dont.

Here is a link with pricing, etc. I could ship these to you for free as well. I would have to order them in though.

http://www.mitsubishiparts.net/cart/...37745+MR537746
yea, i would like to order them. How can I get the free shipping?
Reply
0
Old Sep 18, 2007 | 01:54 PM
Share
  #2065  
RussellM's Avatar
RussellM
Plat Vendor
iTrader: (256)
 
Joined: Jul 2007
Posts: 3,412
Likes: 4
From: Olympia, WA
Originally Posted by budlong
i think everybody who tries to answer this is missing the point of the question.

I have an evo fuel pump... and i am not sure if it is the higher flowing evo 9 pump, or if its an evo 8 pump. The only part number listed on the fuel pump is a denso p/n.

Can anyone give me the DENSO p/n for both the evo8 and evo 9 fuel pump?

maybe someone has installed an aftermarket fuel pump and has their oem lying around they can check...

thanks
BUDLoNG
I cant get the Denso number from Mitusubishi. They change the number often -- so they say and they wont give them up. Sorry, I did call Mitsubishi and try to get it for you. I understood what you were wanting, but didnt know if you had the Mits part number too.

Sorry I cant help you any further.
Reply
0
Old Sep 18, 2007 | 01:55 PM
Share
  #2066  
RussellM's Avatar
RussellM
Plat Vendor
iTrader: (256)
 
Joined: Jul 2007
Posts: 3,412
Likes: 4
From: Olympia, WA
Originally Posted by ryan0414
yea, i would like to order them. How can I get the free shipping?

Yeah, when you do your order it will put freight on there. I wont charge the freight when I send it out. Im the only person who does interenet stuff here so I will get the order.

Reply
0
Old Sep 18, 2007 | 02:04 PM
Share
  #2067  
Spins4's Avatar
Spins4
Evolved Member
iTrader: (122)
 
Joined: Nov 2005
Posts: 899
Likes: 0
From: Coventry, R.I
Originally Posted by ryan0414
I want to buy the nozzles on the hood, but my dealer told me that I couldn't buy the nozzles without the hoses. Is that true? or is there any individual part # for just the nozzles? I don't want to pay $35 for the whole thing.
The nozzles actually come with the hose. Which nozzles were you looking for? I sell those galant ones with the flat spray for like $15 shipped. PM me if interested.
Reply
0
Old Sep 20, 2007 | 03:20 AM
Share
  #2068  
justchil's Avatar
justchil
Evolved Member
iTrader: (44)
 
Joined: Oct 2003
Posts: 4,409
Likes: 0
From: Charleston, WV
Originally Posted by RussellM
I think I put the numbers for everything you requesting in the link for pricing, but look at the CAPS illustrations to make sure I got them all. Also, this should give you an idea of what all is in there, let me know if you need any other parts.


http://www.mitsubishiparts.net/cart/...*4+MB809343*2+




Thank you!

How about 41326 41327 which should be the ball joint cover and clip thing that holds it on?
Reply
0
Old Sep 20, 2007 | 06:53 AM
Share
  #2069  
Spins4's Avatar
Spins4
Evolved Member
iTrader: (122)
 
Joined: Nov 2005
Posts: 899
Likes: 0
From: Coventry, R.I
I know this is not really the place to post this. But I figured it would be ok, considering the amount of emails I am going to get a day, and that I can no longer help.

https://www.evolutionm.net/forums/sh...73#post4764873

Russell...you guys hiring? *sigh*
Reply
0
Old Sep 20, 2007 | 10:32 AM
Share
  #2070  
RussellM's Avatar
RussellM
Plat Vendor
iTrader: (256)
 
Joined: Jul 2007
Posts: 3,412
Likes: 4
From: Olympia, WA
Originally Posted by Spins4
I know this is not really the place to post this. But I figured it would be ok, considering the amount of emails I am going to get a day, and that I can no longer help.

https://www.evolutionm.net/forums/sh...73#post4764873

Russell...you guys hiring? *sigh*

I replied in that thread.
Reply
0



Advanced Search

All times are GMT -7. The time now is 01:12 AM.