BoV psi question
Joined: Apr 2005
Posts: 9,002
Likes: 12
From: somewhere testing various tires, brakes, and suspensions.
If you can put on the cone part without using the hard pipe - then yes that will work with out a flash. Is the the dual vent aps? Just be sure that you vent enough back into the intake or you may experience stalling issues.
Joined: Apr 2005
Posts: 9,002
Likes: 12
From: somewhere testing various tires, brakes, and suspensions.
Thats the funny thing about Evos, same car, but each takes mods differently. Like the Type S I have, lots of people here have the S, but we all have it set differently. I dont think its the build of the valve, but rather what the car "likes". In the end it comes to preference and loyalty.
Originally Posted by SmikeEvo
Intake and Filter - flash.
Filter (cone or panel type) only - no flash.
Correct - just change to a bov that flows like stock but can hold the boost better will work fine.
What do you want to get out of your bov? I needed better holding power because I run more psi and whatnot. Sound was a side benefit. If its just to hear the whoosh sound then I would change to the cone filter and leave the stock dv in. If you plan on adding a boost controller and to run more boost, or yours is leaking, then an aftermarket will correct that.
The pic is for Evolution888, sorry to put it here, but its a really ghetto mspaint job.
Filter (cone or panel type) only - no flash.
Correct - just change to a bov that flows like stock but can hold the boost better will work fine.
What do you want to get out of your bov? I needed better holding power because I run more psi and whatnot. Sound was a side benefit. If its just to hear the whoosh sound then I would change to the cone filter and leave the stock dv in. If you plan on adding a boost controller and to run more boost, or yours is leaking, then an aftermarket will correct that.
The pic is for Evolution888, sorry to put it here, but its a really ghetto mspaint job.
At first i thought i had to change the stock bov no matter what to get the sound, but if i can just change the filter without touching the intake and flashing I'll do it next weekend
Got a wedding to go to this weekend, and then the girl... busy busy.. haha
