Besides streetconcept.com who sells the replica Gialla air ducts?

 

These?



evodave vbmenu_register("postmenu_2446433", true);
Silver Vendor
Vendor Sales Rating: (224)



Join Date: May 2003
Location: Ohio


Drives: EVO 8

Offline



Carbon fiber bumper ducts installed!!
Yesterday, 10:58 AM #1
group buy:

https://www.evolutionm.net/forums/sh...d.php?t=163015


Guys these are for real! Top quality and fit. special thanks go out to Matt at Slickmotorsports for helping me install them... worked out great.... we used a rear low profile black headed screw ....first i drilled the holes in the carbon ducts...most were already marked on the ducts (took about 10 minutes). ONce that was done we placed them up there where they needed to be (check, check and recheck). Then we drilled a couple smaller pilot holes into the actual bumper . Once that was done we screwed it in....simple as that...



Notice in this picture i drilled the holes (then just set it on the bumper) so you could see how the spacing goes....














with stock oil cooler guide back on the rear of the pass. side



drivers side with intake duct connected!










__________________
www.lightmods.net

http://public.fotki.com/evodave/headlights/

http://public.fotki.com/evodave/evo_8_taillight/

I am the headlight and taillights modification expert. Please PM me for details.... (btw i can pretty much modifiy the lights on any cars) Lifetime warranty !

Built by: Slickmotorsports Tuned by: Switzer Performance
11.12 at 129mph.... getting faster... 10s or bust ...well i busted 2 stock front diffs... Time to upgrade !

 

sorry for the confusion. I wanted these

http://rbmotoring.com/gallery/album54/aav

 

Are these the Varis oil cooler guides?