Interesting EVO issue, gas neck filler prob.
Dec 2, 2005, 08:08 PM
#1
Evolving Member
Thread Starter
iTrader: (6)
Join Date: May 2005
Location: Volo, IL
Posts: 392
Likes: 0
Received 0 Likes
on
0 Posts
Interesting EVO issue, gas neck filler prob.
About 2 weeks ago I go to fill up my tank, first time its pretty cold, like 14 degrees or so. I Go to get gas, set the pump on automatic and it keeps clicking off like gas is hitting the filler so I get pissed and say screw it, must be the pump and just do half a tank. next time a few days later its still cold, and the pump does the same thing so I'm thinking, what did i do now. I was no where near the filler neck, it couldnt be crushed. By this I mean I can put in gas, but very slowly otherwise it backs up to the spout. So it gets warmer, and boom, it works perfectly. Then today, its real cold so I go to get gas and it starts acting up again. It must take twice as long to fill up because I cant get the full flow out of the pump, maybe half a squeeze. So I listen and it sounds like gas is backing up in the filler neck. This is impossible, no way it can shrink this much. Anyone else have this goofy issue?
Dec 3, 2005, 06:57 AM
#7
Evolved Member
iTrader: (10)
Join Date: Sep 2005
Location: space
Posts: 700
Likes: 0
Received 0 Likes
on
0 Posts
Funny, i just went through this yesterday. Clicked it self off about 5 times before i figured it out. I had to pull the pump out about half way and let it just barely sit in the filler neck. Then it worked just fine. Strange? Temp was about 3 degrees.
Thread
Thread Starter
Forum
Replies
Last Post
