Wow, looks awesome.

 

ImportPePe
That was my question too, cus i woudl love to have that on mine when i get it but i cant even put a poster straigt on teh while and i can constantly ajust that this $hit is permantent...........

 

its called a level

 

Yeah, any kind of straight edge, and you can just line it up with the bottom of the .

 

Leonardo,
VERY good. The picture with the WRX in the reflection is my sister's car. She was taking pictures of my car and noticed that she could get her car in the shot as well, at the correct angle.

 

Yojimbo,
The lights fit perfectly. It didn't take too long for the switch. Just unscrew some screws and pop 'em out. Unplug the wire, swap, plug back in, screw it back in. No probs.

 

ImportPepe,
I was thinking of using a level, but I couldn't trust that the ground I was on would be level as well, so I decided to put some tape across the back of the trunk, making it at as straight as possible. Luckly, we had the entire trunk lid so my friend got a thin piece of flexible wood and started marking where the letters should be, which is about 3/4 of an inch apart. After figuring out that the entire word was about 19 3/4 inches, we marked the middle point on the wood and on the tape that was on the EVO8. We lined up the middle points and taped the wood against the EVO8 trunk, (on top of the tape I had there before of course). The hard part was slicing the double stick on the letters. Took a long time to get it all right. Anyway, we stuck the letters on the trunk, using the wood as a guide.

 

how much did they lights and the tails cost?

 

Hi cyrax5709,
You mean the tail lights? You can read up about that on this other thread:
https://www.evolutionm.net/forums/sh...5&pagenumber=1