Clutch installing problems
Thread Starter
Evolved Member
Joined: Mar 2004
Posts: 1,041
Likes: 1
Clutch installing problems
My car is an Evo 7 and is at Mitsu dealer changing the clutch.
I bought these parts:
Act streetlite flywheel
Evo 8 MR clutch disc
Evo 8 Ralliart pressure plate
The mechanic told me that the stock bolt does not have enough size to hold the pressure plate with the flywheel.
He told me that the Evo 8 pressure plate is beefier than the Evo 7
The only way would be difference bolts or
To put all together with too much pressure with some risk.
I did not know that it would not install properly because I know an Evo 7 member with Ralliart Evo 8 pressure plate + stock Evo 7 disc + stock flywheel
Where is the problem?
Beefier Act flywheel
Evo 8 pressure plate on the Evo 7
Evo 8 MR disc
How to solve this?
I bought these parts:
Act streetlite flywheel
Evo 8 MR clutch disc
Evo 8 Ralliart pressure plate
The mechanic told me that the stock bolt does not have enough size to hold the pressure plate with the flywheel.
He told me that the Evo 8 pressure plate is beefier than the Evo 7
The only way would be difference bolts or
To put all together with too much pressure with some risk.
I did not know that it would not install properly because I know an Evo 7 member with Ralliart Evo 8 pressure plate + stock Evo 7 disc + stock flywheel
Where is the problem?
Beefier Act flywheel
Evo 8 pressure plate on the Evo 7
Evo 8 MR disc
How to solve this?
