Uhh is it just me or does it look like it's pulling timing around 6100-6200? You could fix this yourself with a 90$ cable and ecu flash... If you have a wideband and a few other things.

What was ur AFR like?

 

Also you could easily drop .1-.2 with a better launch. There is something definately up with the car tho. I wonder if there might be a member that's local that might be willing to help?

What is the elevation at your local track?

What psi are you hitting at redline?

 

210whp is on there mustang dyno. If your not using a mustang dyno it will be hard to compare numbers.

 

Elevation is 1,100.... And unfortunatly i have no clue how to fix it myself... BUT if someone came to Sioux City, IA and wanted to fix it, and did it right ( not just rigging it up ) and fixed everything and I had 300+ WHEEL HORSE POWER that Buschur Racing says I am suppose to have, I would be willing to pay. All I know is yesterday I posted my dyno runs, time slips and that video of my car and in 21 hours I have 82 responces to that thread that said WTF!!! everyone said there is something wrong with my car and i dont know what the hell is wrong with it

 

Is it me or does this dynosheet look like someone playing connect the dots with MS paint... you sure that was a real dyno and not just some free rolling wheels ?

 

Do you have a wideband? If so whats your AFR? Also you may have a boost leak and not know it. I had a few when I first started adding parts. I would recommend ecuflashing it yourself and seeing how that goes. FYI Buschur Racing stages only go up to 4. Mail in flashes are only basic as well. Other than that dunno man. You have an aftermarket BOV?

 

here is another sheet from the dyno run... and honestly was the MS paint comment nessesary??? I just want to get my car fixed!! i am sure if you were in the bind that i am in that you wouldnt like these smart a$$ comments... i am not pissy or mad just upset that I have spent $5500.00 to gain 42 WHEEL HORSE POWER and drop 1.1 seconds off my quarter.

 

It does look like your car maybe pulling timing past 6krpms. One other think to note not all dyno's read the same numbers. Its hard to compare number when most people use a dyno jet or a mustang dyno. I have not seen anyone on the board post a dyno chart with the same brand dyno this guy used. Looks to me like you might have a bit to much timing or not enough fuel up past 6k.

 

get your car tuned by some one diffrent, or have AL fix your tune.

 

Good luck getting it worked out!

No harm meant to you, the dyno/dynosheet just looks very very shady to me for some reason

 

KOEvo dynoed close to 250 whp on his stock 05 evo, Buschur FMIC on stock turbo? Definatley losing some PSI there.

 

I understand, I was there the whole time, i have been around a few dynos too. I didnt mean to snap back i am just so frustrated with the car and the fact that every one is telling me i am missing about 80 to 100 WHEEL HORSE POWER. I just need to find out why

 

OK first off... go to www.buschurracing.com go to the EVO 8 and you will see they have up to a stage 6 now.

Second I dont know how to flash myself

Third I have called AL at DynoFlash and he told me that everything is right on my computer....

 

Umm so the threads are combined now or what!?!??

 

yeah i guess, i am surprised too. I started it and now somehow they are combined... who did that? why?