SO here's what i got:

Arrived:
Perrin DP
Perrin Test Pipe
Full DC SPorts Exhaust

On the way being shipped to Dubai:
Works drop-in Filter
Works flashed P2R ECU

Here's the test-install of the parts and how it looks:



Having posted a query before, I wanted to make sure of the following procedure for the install (and this mostly goes to BoostedGP-Mike, who's conversant of our Euro/JP cars!)



1) I certainly have to close the O2 sensor hole no.2 with the bung, i dont even have a sensor in my car for it!

2) I have to place the car's sensor back in Hole No.1 and make an extension as i read thru the posts (Now the problem is to find a spark plug extension in this country!)

3) I will have to instal and connect the O2 simulator for the test-pipe sensor located under the gear console, right side (as i understand from Mike)

Please I would like to confirm the above and all your help is really appreciated..

Thanks

Wael

 

Dont use an 02 sim, it just messes up your wiring and will eventually fail. Just use a sparkplug antifouler between your 02 sensor and the bung.

 

Ok it's exactly what Oliver at WORKS told me.. Get an extension and drop the simulator!

So I called him now and he's gonna add that antifouler to my shipment! Great! Thanks Silk!

Expecting more feedback, Thanks!

Wael

 

nice thats a full 3 inch?

 

yap! 3in all the way!!

Wael

 

You guys needed to exten the o2 wires to get the o2 sensor to go in that bung on the testpipe? I"m not understanding this, because my o2 sensor was long enough to go either in the testpipe OR the midpipe of the exhaust...?

 

Our O2 sensors have different locations than yours.. Our sensor is just long enough to go in the test pipe bung. We dont have a sensor in the rear bung location!


Wael

 

waz...did you ask him to order antofouler for me too?