Greater Baltimore Area
Thread Starter
Newbie
iTrader: (2)
Joined: Jul 2006
Posts: 69
Likes: 0
From: Cary, NC & Annapolis, MD
Thanks for the input fellas, I see that Atlantic is only about 45 min from me which is a walk in the park. I need to get some miles on my car and need to hit up some group buys before Al comes to town as I have heard nothing but great things about him. I hate to say it but I truely have way too much to do in so little time. On a side note I used to own a 99 Mustang GT in which I replaced every part in and on that car. 100% street legal 93 octane daily driven(most of the time) and it put down 672 rwhp and 618 Ft/lb rwtq 700+ on C16. It took two years and four tuners with three different kinds of software to get there. I have had my share of tuning and tuner issues(friggin nightmares) so as far as tuning goes for the Evo I know what to expect(from previous modified vehicles) and will not go through that again.
agile auto is great, hill is a real nice guy. Very knowledgeable. i had all my work down there with my suby, and some with my evo. great ppl.
What do u do at ruth chris. i work arcoss the street a charleston.
What do u do at ruth chris. i work arcoss the street a charleston.
Thread Starter
Newbie
iTrader: (2)
Joined: Jul 2006
Posts: 69
Likes: 0
From: Cary, NC & Annapolis, MD
Originally Posted by Light
agile auto is great, hill is a real nice guy. Very knowledgeable. i had all my work down there with my suby, and some with my evo. great ppl.
What do u do at ruth chris. i work arcoss the street a charleston.
What do u do at ruth chris. i work arcoss the street a charleston.
Originally Posted by CBRD
If you guys will feel like taking a hike (45 mins) up to york, pa in late sept... we will be opening our new shop...
2 brand new lifts, hunter mounting and balancing equipment, AWD mustang in-ground dyno, air conditioned shop, 7000 sq feet, 2 race simulators etc....
Cheers
cb
2 brand new lifts, hunter mounting and balancing equipment, AWD mustang in-ground dyno, air conditioned shop, 7000 sq feet, 2 race simulators etc....
Cheers
cb
When are you planning on opening the shop? and where? I am a good friend of Jason Matthews who I believe you know and I have heard about this for months!
Originally Posted by blackbichGSX
Chad,
When are you planning on opening the shop? and where? I am a good friend of Jason Matthews who I believe you know and I have heard about this for months!
When are you planning on opening the shop? and where? I am a good friend of Jason Matthews who I believe you know and I have heard about this for months!
its looking like sept now....
we are right on rte 30, down from york nissan, the new sign/awning should be up this week, or early next, and work continues inside.... and the ramp outside....
keep in touch
cb
Welcome to the area. As everyone has said there area lot of good shops in this area. You may also want to post in the mid atlantic area. That is our local area, and y ou may get some more responces.
+1 for isp racing
caelin~
+1 for isp racing
caelin~
www.jacksonautomachine.com is located southeast of baltimore, and is one of the best 4G63 machine shops in existence (in case your looking to buildup your block).
Thread
Thread Starter
Forum
Replies
Last Post
