Lancershop has them again! I just got this in my email this morning:


You have received this notification from LancerShop.com because you are a registered user or you or some other registered user requested some information for you from our store.
-------------------------------------------------------------------
Hello Lee,

We wish to inform you that the following product that you were interested in, is now back in stock.:

Evolution IX UK Rear Chrome Trunk Badge EVO 9
===========================================
The Lancer EVO 9 badge says Evolution IX in BIG chrome letters
and mounts on the trunk of your EVO 9.



Badge will easily mount on your lancer with the self adhesive material on the
back. Imported directly from the UK and very hard to find. Please Note this is a
real Mitsubishi emblem and NOT a piece of cheap vinyl.

This badges comes in chrome only, black evolution IX badges are not made.


Please click this link to see product detailed information:

http://www.lancershop.com/customer/p...?productid=763

--
Thank you for shopping with LancerShop.com!

 

Thanks for the heads up!

 

neat

 

Thanks

 

yay - thanks for the info

 

Grab them if you can. Its worth it.

 

werd...

 

hahha...I like how everyone and thier mother wanted it a few days ago out of randomness, and now they just recieved a shipment of them after like...4 months?

 

if you buy this UK emblem, how do u take out the original "Lancer Evolution Emblem" from factory?

and if everything's done properly how much WHP gains?

 

thank you for the info.

 

Heat it up with a hair dryer/heat gun and then get some fishing line and slide it underneath the emblem and take it off slowly. Then just remove the excess tape with tar & bug remover and then clean the spot.

 

Crapola... it's $82. I would buy it if it was more like ~$45.

 

dental floss also works well for debadging. since it's a softer material, it has less change of mussing the paint when sawing through the glue, although I imagine fishing line is a hell of a lot easier.

If there is any left over glue, use Goo-Gone to get rid of it, just be sure to wax afterwards.

 

mine is a MR where can i get that when i buy the evolution ix badge

 

you can get the mr badge on the same site http://lancershop.com/customer/produ...&cat=49&page=2