Project FQ-340..... Build Up Pics/Vids/Dyno
Feb 14, 2007, 02:48 PM
#27
Newbie
Thread Starter
Join Date: Jan 2006
Location: FL
Posts: 91
Likes: 0
Received 0 Likes
on
0 Posts
btw, its not laggy, on the street, in sixth gear, it hits 14 psi by about 4000 rpms.
Feb 14, 2007, 03:05 PM
#28
Account Disabled
Join Date: Mar 2005
Posts: 2,001
Likes: 0
Received 0 Likes
on
0 Posts
He should of used a Brian Crower 2.4 liter stroker kit. That would be a better match for the GT35R. Here in this forum there is another British guy that is running a 2.4 liter stroker kit. His kit is custom though. He has the Brian Crower 102mm crankshaft and the pistons and connecting rods are from different suppliers.
The Brian Crower stroker kit can handle 800+ horsepower. With this kit and a GT35R turbo you will reach 20psi by 3600rpm in third gear. It is also much less expensive than the JUN kit.
The kit I am refering to was initially first made for a British tuning company shooting for 1000hp.
https://www.evolutionm.net/forums/sh...+gt35r+evo+vii
The Brian Crower stroker kit can handle 800+ horsepower. With this kit and a GT35R turbo you will reach 20psi by 3600rpm in third gear. It is also much less expensive than the JUN kit.
The kit I am refering to was initially first made for a British tuning company shooting for 1000hp.
https://www.evolutionm.net/forums/sh...+gt35r+evo+vii
Last edited by Vigo; Feb 14, 2007 at 03:26 PM.
Feb 14, 2007, 03:10 PM
#29
Evolving Member
iTrader: (4)
Join Date: Apr 2005
Location: Ft. Myers FL
Posts: 212
Likes: 0
Received 0 Likes
on
0 Posts
I am running an ams 2.3 witha buschur 35r kit, I am guessing that this (your) kit has a larger back housing? Or would you be able to reproduce results like this on my car (because at the moment I am in the mid 400's on pump...
