Need Help with Evo IX ecu pin outs
Thread Starter
Evolved Member
iTrader: (34)
Joined: Apr 2006
Posts: 1,748
Likes: 2
From: Port Arthur, TX
Need Help with Evo IX ecu pin outs
http://www.jestr.com/temp/ixpinouts.pdf
I use that PIN out chart to help me find out where the wire goes too but i cannot seem to figure it out the chart does not list the correct color i need.
I have a wire & pin that had been pulled out of the plug from connectors 71-100, It is Light green and im thinking its within the first 10 ports or so. If anyone can take a picture of the Plug that has 71-100 for me i would be greatful.
I use that PIN out chart to help me find out where the wire goes too but i cannot seem to figure it out the chart does not list the correct color i need.
I have a wire & pin that had been pulled out of the plug from connectors 71-100, It is Light green and im thinking its within the first 10 ports or so. If anyone can take a picture of the Plug that has 71-100 for me i would be greatful.
Thread Starter
Evolved Member
iTrader: (34)
Joined: Apr 2006
Posts: 1,748
Likes: 2
From: Port Arthur, TX
bump I need a pic asap.
Also if someone could look on the fire wall near the "FPR" they have a Denso "i think its denso" resistor box, its small it clips on near the top, i need to know what color the plug that goes in it is, Green or white.
Also if someone could look on the fire wall near the "FPR" they have a Denso "i think its denso" resistor box, its small it clips on near the top, i need to know what color the plug that goes in it is, Green or white.
