i just did the anti fouler CEL fix a couple days ago. the part number for the anti fouler is 42009 i believe and i got mine from Autozone. you have to drill one of the anti foulers with a 1/2" drill bit. then you screw the drilled anti fouler into the second anti fouler and then screw in the o2 sensor. screw the whole thing into the test pipe (or mid pipe) and you'll be good.

 

I have the same exhaust and it has worked well so far. I had to do a little bit of bending on the muffler holders to make it look like it fit correctly in the bumber cut away

 

I'm considering getting something similar to replace my ghetto crush bent catback. It seems like there are too many variables and companys getting in on the ebay market, kind of a hit or miss

 

This exhaust is well worth it.. I bought one for like 180 bux long time ago.. I didn't used the DP.. instead I used my JIC MR version to clear the ACD.

Other than that it rocked.. I turned around and sold my DP for 150 bux to some noob.. lol

 

wow thats crazy even with the $50 shipping thats a great deal
thanks for the link

 

Ive had same catback different test pipe and downpipe, and for over 1 1/2 years never rusted! fits perfect, since i got good deal on helix, someone else is using it, some people like to pay big bucks for catbacks/pipes, its up to them

 

https://www.evolutionm.net/forums/sh...d.php?t=114931

 

my friend has the same exhaust on his 05 he just had to bend the dp where it passes the ACD, we heated up the DP and tapped it with a hammer, the exhaust fit perfect other than that, hes had it on his car for almost 2 years

 

I dont know of any companies who have a straight pipr for Evos. But all you have to do is go to any regular muffler shop and pay them to cut off your muffler, and get them to weld on a 3in pipe to your exhaust. I bet it will cost like $50 bucks.

Sure thing once I get my clutch installed I will go for the straight pipe setup.

 

the whole turbo back was for 230$??

 

i paid 210 and 50 for shipping. BEEMERFREAK let me know asap. PM me when you get it done. thnx

 

looks exactly like mine, 3" and welds are impeccable
I love my XS power ebay exhaust, best $240 ever spent.
welcome to "powered by Ebay" club

 

I got the exhaust installed on Monday, and I am VERY impressed thus far. The only problem that I ran into was that the new "donut gasket" that was sent with the exhaust ( hotside to downpipe...) was to small in the inner diameter, so i was having a huge problem getting the new downpipe on. I ended up using the stock one even though it was a little torn-up. Other than that, once the entire exhaust was off, I may have spent 10 minutes putting the new pieces up (granite i was lucky enough to use a lift and air tools). It is a loud exhaust, but does have a deep tone to it. Like i said before, once i get into doing some major engine/turbo mods, i will end up getting a different exhaust (i.e. buschur or ams). I had seen many people on here with the ebay exhaust and had never even considered buying it until i saw someone on here with some pics and a couple of vids of it. i bought it that day. For the money, I am very impressed with the fitment and quality of the exhaust and would recommend it to anyone who is just planning on doing light mods or save cash, or wants a loud n1 style exhaust. Im gonna try to get a vid up soon, but i only have a video camera on my phone and not sure how well its gonna turn out.

 

CEL fix is about $3 i think at advance auto! Exhaust looks good, i went the expensive route but that still looks good and as far as bang for your buck goes....Just watch out for rusting, my friends got pretty bad. But i doubt it would get to the point of cracking or rusting through......