Notices
Evo General Discuss any generalized technical Evo related topics that may not fit into the other forums. Please do not post tech and rumor threads here.
Sponsored by: RavSpec - JDM Wheels Central

Setting Boost Problem

Thread Tools
 
Search this Thread
 
Old Oct 21, 2007 | 01:41 PM
  #1  
KS_Evo9's Avatar
Thread Starter
Evolving Member
 
Joined: Feb 2007
Posts: 310
Likes: 0
From: Kansas
Setting Boost Problem

Ok guys so I wanna boost 1.5bar. The problem is when I set boost to hit 1.5bar in 1st/2nd gear when im in like 3rd/4th/5th I boost way to much like 1.6bar. When I set boost to 1.5bar in 3rd/4th/5th in low gears like 1st/2nd I boost only 1.3bar. Its getting annoying so do I set it to 1.5 on higher gears and boost lower on low gears or boost 1.5 on lower gears and boost higher on higher gears. GRRR LOL
Help / Advice would HELP ALOT!!!!


4G63T FTMFW!!!
Reply
Old Oct 21, 2007 | 02:12 PM
  #2  
chaotichoax's Avatar
EvoM Staff Alumni
iTrader: (149)
 
Joined: Apr 2005
Posts: 6,108
Likes: 18
From: New Jersey
you can't achieve the same amount of boost in low gears that you can in higher gears due to the fact that there is less load

just set it boost what you want in third or fourth
Reply
Old Oct 21, 2007 | 02:16 PM
  #3  
KS_Evo9's Avatar
Thread Starter
Evolving Member
 
Joined: Feb 2007
Posts: 310
Likes: 0
From: Kansas
Alright thanks for your help man.
Reply
Old Oct 21, 2007 | 06:05 PM
  #4  
KS_Evo9's Avatar
Thread Starter
Evolving Member
 
Joined: Feb 2007
Posts: 310
Likes: 0
From: Kansas
All I did was go on the highway and put the car in 6th gear and at WOT to redline it stays at 1.5bar doesnt fall even a tad. So I wanted to see what it would boost in 1st 2nd etc... It still hits 1.5bar but tapers down just a tad do like 1.3 1.4. Think I should just leave it like this that way no matter what load im under it wonte go over 1.5 bar? What do you guys think.
Reply




All times are GMT -7. The time now is 11:16 AM.