exactly me ^^

 

You can get the AMS LIPK which has a support bracket just like factory. This one wont blow off.

 

I love that AMS and Nisei both have mounting brackets.

 

30psi...couldn't find a tbolt small enough to slip on. Jegs non vibration worm clamps has worked fine for almost 1 year.

 

ETS LICP v1 with tbolts without any issues. Boosting around 22 to 23psi.

 

Buschur licp 24lb's lost it. Flew out under back tire and into the air.

 

Has anyone used a Wiggins clamp type setup for their pipes? I know they're really expensive. Just curious to see who has done that.

 

I blew mine and I wasn't even driving it hard. It was shortly after I had it put on along with some other work done by "this shop" and when it blew off I was right near the shop and coasted to it... They obviously didn't put it on strong enough, or right, but still charged me a $45 to put it back on!!!! I was pretty pissed.

 

I run a nisei on 24 psi, haven't had a problem as long as you have it clamped tightly

 

popped off at 25 psi. i was using stock couplers and clamps. i switched to t-bolt clamps and it hasnt came off since. get t-bolt clamps and you will be fine.

 

My Injen blown off a couple of times. Then I went with ETS and never had a problem since.

 

Nisei at 23 psi has not blown since I put it in almost a year ago.

 

i had the ETS LICP on my car with stock clamps and never blew off and i was running about 23/24 lbs. when i traded it to my friend for his stock one(just ordered injen full kit for myself) and I guess he must of turned his boost to above 25 and it blew off many times. So IMO ETS is great with some tbolts just not at boost your car cant handle haha

 

First my BR licp popped off but once i tightened the stock clamps nice and tight it hasn't popped since. However, my uicp has popped off a few times in the past month or 2 lol. Gonna head up to AMS sometime soon and get their uicp, mini battery, and t-clamps for all

 

yeah i T bolt clamped mine and have had no problems