Hello EvoM,
We are excited to announce that we have finally taken the plunge and decided to become vendors on this site.. I just wanted to make a thread to let everyone know who we are we are and what we're about!! We are still fairly new to this site and if i posted this in the wrong section, mods please feel free to move it at any time!!!

In 2004, Carz Performance opened to fulfill the racing community’s needs for a performance based service facility, as well as an AWD chassis dyno shop. We have really made a local impact on the EVO performance and parts market and are proud to have the Quickest and Fastest Evo's in the state!!

Here at Carz Performance, we pride ourselves on providing customers with quality parts, excellent service, and accurate information. While we work on a wide range of cars and trucks, our main priority is increasing performance, reliability, and style. Whether it’s a cold-air intake, suspension setup, or complete race car build we will gladly accept the challenge of helping you obtain your performance goals. We keep an outstanding inventory of available parts, supporting most forced induction platforms, and we are available to install these parts as needed. We stock Buschur Racing products, Aeromotive, Percision, AMS, Spark Tech, Magnus, Hypertune, Nitrous Express, Cp racing pistons, Crower rods, eagle rods, in house engine builds, Jackstransmissions built transmissions and t-cases, Driveshaft shop axels, Impact racing gear, and much much more....

As stated we have built, tuned, raced and sponsered the Fastest evo's in the state and we are looking to get our name out to some of the surrounding areas and with the assitance of EVOm we hope to bring some entertaining builts, dyno comparisons on parts, and hopefully some faster E.T.'s and MPH's for both our cars and yours!!

I'm going to try and get some pictures and videos of a few cars we have built and tuned here at CARZ PERFORMANCE..

SHOP EVO... The Silver one..

• Vehicle Type:
  Front Engine All Wheel Drive
• Engine Type :
  DOHC 16 Valve 4G63 Steel Block, Ported Aluminum Head by Madcap Racing, 2.3 liter with Precision GT37R Ball Bearing Turbo and plenty of other goodies.
• Nitrous: Nitrous Express Direct port setup with twin 10# bottles, purge, bottle heaters, bottle openers and insulating jackets
• Power:
  810awhp (all wheel horsepower) @ 6700 RPM corrected
• Torque:
  661 tq @ 6200 RPM @ 30psi of boost tuned by "DynoDude".
• Transmission:
  5 speed Jacktransmissions.com built tranny
• 10.6@137

DynoDude (Lucas) Daily Driver (Black Evo 9)

• Vehicle Type:
  Front Engine All Wheel Drive
• Engine Type :
  DOHC 16 Valve 4G63 Steel Block Aluminum Head
  2.0 liter
• Power:
  498awhp (all wheel horsepower) @ 7000 RPM corrected
• Torque:
  448 tq @ 4700 RPM @ 28psi of boost on E85 tuned by DynoDude55 (Lucas)
• Transmission:
  5 speed jacktransmissions.com built tranny

EpicEVO... (Mark Weadick).. (White Evo 8 RS)

• Vehicle type: Front Engine AWD
• Engine type: Carz Performance Built 2.0L 9:1 Compression with Crower rods
• Power: 610AWHP@32psi on E-85... 709AWHP@32psi with a 50shot on E-85
• Torque: 425AWTQ@32 psi on E85... 566AWTQ@32psi with a 50shot on E-85
• Jackstransmissions.com build 5 speed and T-Case
• 10.26@139 on E-85 with a 50shot.. 10.53@131 off nitrous on E-85

There is plenty more to see and hear about with us including more builds and hopefully quicker and faster times at the track..

Stayed tuned, but for now here are those pictures and videos.. You can also visit our website at www.CARZPERFORMANCE.com ... Or Myspace pages

Thanks for the space...

Mark

 

http://www.youtube.com/watch?v=bsFY36JnBB0 ..... Carz Performance win.. 2008 street tuner mayhem (EpicEVO). Local event here at bandimere speedway.

 

Very Nice.....glad to have you guys on board Friendly, knowledgeable and fun guys to work with. Fast cars and the experience to get the job done

 

Thanks guys!!!! We are happy to sell you products..

 

We're making some really nice brackets for the cdi boxes in wrinkle black....you'll love these

 

Nice!! We need to get some videos up with the cars with your COP on them..

 

Be sure to look for us out at Bandimere Speedway this Saturday October 4th as we will be up there representing the Evolutions!