Connect LC-1 to SBC i-color
Thread Starter
Newbie
Joined: Jun 2006
Posts: 14
Likes: 0
From: between keyboard and chair
Connect LC-1 to SBC i-color
Hi guys!
Yesterday I've set up an LC-1 and XD-16 in my IX. Works so far. The LC-1 has a wideband analog output (ANOUT2 Yellow cable) with following defaults 0V = 7.35AFR 5V = 22.39AFR. Now I'd like to have the AFR displayed not only on the XD16 but in my Blitz SBC i-color (Boost/RPM/AFR graph). The manual isn't any big help, I found that there can be (up to) 4 user defined signals. (AUX and Data1-Data3). But where to tap in?
Has somebody done that already and can give me some hints? Any help would be greatly appreciated. Thanks.
Yesterday I've set up an LC-1 and XD-16 in my IX. Works so far. The LC-1 has a wideband analog output (ANOUT2 Yellow cable) with following defaults 0V = 7.35AFR 5V = 22.39AFR. Now I'd like to have the AFR displayed not only on the XD16 but in my Blitz SBC i-color (Boost/RPM/AFR graph). The manual isn't any big help, I found that there can be (up to) 4 user defined signals. (AUX and Data1-Data3). But where to tap in?
Has somebody done that already and can give me some hints? Any help would be greatly appreciated. Thanks.
