If you could do it again
If you could do it again
I was wondering if you guys could start over with your evo from stock, would you take the same path or would you do it different. What was your first mod? If you could do it again what would you first mod be know that you have all the info you have?
Evolved Member
iTrader: (7)
Joined: Sep 2004
Posts: 1,457
Likes: 0
From: South Beach, FL / Miami, FL / Pt. St. Lucie, FL / NYC
T-bolt clamps were my first mod, not counting flipping the radio and the gauges.
Honestly, I'd take the same path again - minimal mods, maximum drivability. Our IX with pretty much nothing pulls almost as much power on our local MD as cam'd IXs with multiple bolt-ons, and with better than stock street manners. With 30lbs less rotational mass, F/R anti-swaybars, the factory Bilstein setup, and a somewhat aggressive alignment the car flies around corners. Couldn't be happier.
Honestly, I'd take the same path again - minimal mods, maximum drivability. Our IX with pretty much nothing pulls almost as much power on our local MD as cam'd IXs with multiple bolt-ons, and with better than stock street manners. With 30lbs less rotational mass, F/R anti-swaybars, the factory Bilstein setup, and a somewhat aggressive alignment the car flies around corners. Couldn't be happier.
I wouldn't have changed anything. I took my time and did a lot of reading, which educated myself on the proper first mods. I only wish that they had the "Modding for dummies" thread when I first bought my car. It would have saved me alot of reading.
i would of done the same things i did but would of waited till i got everything i wanted before slowing getting mods and install. i rather have stock to OMFG HOLY MOLY FAST
but i have things piling up so its kinda like that
but i have things piling up so its kinda like that
Trending Topics
It changes all the time.. Bought my first evo and went one direction with it, bought my second evo and went a different direction with that one, then changed everything and went a different direction and then now Im going a different direction. Never ends.
Next car will get a built motor first, and not waste my time with bolt ons until I have everything ready to go.
Next car will get a built motor first, and not waste my time with bolt ons until I have everything ready to go.
I probably should have mentioned this earlier, there's a long thread about modding regrets. Do a quick search for it. Everyone thinking of modding his Evo should read it. Good luck.
I would have done it very different, wasted too much money on making it look good and sold the parts after. I realized I was never satisfied with it, which I would have left it stock and just enjoyed it.






