I recently bought a evo IX lip from this kind man on here and i dont know how to put it on. Maybe you guys could tell me how to screw it on? Thanks.

 

I used a glue gun when i had to fix mine lol

 

I believe there is a how-to install a lip write up in the "How-to:" section. Probably help you out more than I can

 

remove stock one...use the same screws and screw the new lip on

what kind of answer are you looking for?

you use most of if not all of the existing mounting points

 

He has an evo 8.....I hope I'm wrong, but tell me you aren't trying to put an evo9 lip on an 8 bumper

 

+1^

 

That would be no bueno.....

 

Hhahaha naw. I recently bought a evo 9 bumper but it didnt come with a lip so you guys know where i could get these little black plastic screws from?

 

Does the screw look like this?

 

Don't bother buying the OEM plastic screws. I have swapped all the phillips tipped screws out with the simple "pop-in/out" versions. The stock ones strip/break/ get ripped out. Find the cheapest and use those. OE will cost way to much.

 

putting my 3rd lip on as we speak on my IX. It uses those galvanize metal screws, not plastic.

 

yah they are short fat head phillips screws. Prob can go to home depot to get em. Just make sure they aren't too long. Like I would say 1/2 inch long at most

 

Is the stock lip held on by any 3m tape?

 

It's held on by metal screws only, no glue, no tape. Only screws

 

Is this good enough? -> http://www.mitsubishiparts.net/cart/?pn=MB547806