02 fix
Thread Starter
Evolving Member
Joined: Jan 2008
Posts: 159
Likes: 0
From: Chicago
02 fix
I know i saw a thread that explains the process on doing a cell fix with removing a 02 completely out of the car. Cant find it, dont remember proper key words... My 02 is done for so plug fouler would not work 4 me, i dont want to buy another 02...
Thread Starter
Evolving Member
Joined: Jan 2008
Posts: 159
Likes: 0
From: Chicago
no im not talking about flashing it away. Even AMS dont know how to do it, so if they dont know that means there is no way to do it, lol
I know you have to do something with a 02 connector... there is a thread somewhere, but "o2 fix" key words cant find it...
I know you have to do something with a 02 connector... there is a thread somewhere, but "o2 fix" key words cant find it...
Tephra, MFred, Phenem and others have found a way to flash out the rear O2 using the periphery bits in the ECU.
https://www.evolutionm.net/forums/ec...hramod-v7.html
Option 3 - Thanks to recompile, scheides, and bigric09 88591715 (v7 + Mods + Speed Density) - Download | Mirror
* Setup for JDM MAP and PSI based boost control (mrfred)
* WGDC Correction Interval set to 1 (Stock = 10)
* Max Total Upward WGDC Correction @ 100% TPS set to 0 (Stock = 10)
* EGR System Disabled (mrfred)
* Max Timing Retard set to -20 degrees (tephra)
* FAA bit.10 disabled ("weird unknown" timing pull at cruise)
* FAA bit.09 disabled (cat-warmup ignition retard)
* FBA bit.00 disabled (lean spool)
* FCA bit.09 disabled (EGR Test)
* OBD Inspection set to Pass all tests (acamus)
* Rear O2 Heater patch applied (mrfred)
* Fuel Cut Load Limit x2 and set to 300 (mrfred)
* Speed Density Implemented
* Setup for JDM MAP and PSI based boost control (mrfred)
* WGDC Correction Interval set to 1 (Stock = 10)
* Max Total Upward WGDC Correction @ 100% TPS set to 0 (Stock = 10)
* EGR System Disabled (mrfred)
* Max Timing Retard set to -20 degrees (tephra)
* FAA bit.10 disabled ("weird unknown" timing pull at cruise)
* FAA bit.09 disabled (cat-warmup ignition retard)
* FBA bit.00 disabled (lean spool)
* FCA bit.09 disabled (EGR Test)
* OBD Inspection set to Pass all tests (acamus)
* Rear O2 Heater patch applied (mrfred)
* Fuel Cut Load Limit x2 and set to 300 (mrfred)
* Speed Density Implemented
, car is tuned and is going to a new owner anyways...
helix makes them among many other companies. its a spacer that goes in between your 02 sensor and your exhaust that limits the amount of exhaust gas that reaches your 02 sensor..
http://www.gruppe-s.com/Evo/evoex.htm
gruppe-s has them.
or you can go to your local autoparts store and get a sparkplug non fouler that matches the threads on your 02 sensor and itll do the same thing.
http://www.gruppe-s.com/Evo/evoex.htm
gruppe-s has them.
or you can go to your local autoparts store and get a sparkplug non fouler that matches the threads on your 02 sensor and itll do the same thing.
Trending Topics
helix makes them among many other companies. its a spacer that goes in between your 02 sensor and your exhaust that limits the amount of exhaust gas that reaches your 02 sensor..
http://www.gruppe-s.com/Evo/evoex.htm
gruppe-s has them.
or you can go to your local autoparts store and get a sparkplug non fouler that matches the threads on your 02 sensor and itll do the same thing.
http://www.gruppe-s.com/Evo/evoex.htm
gruppe-s has them.
or you can go to your local autoparts store and get a sparkplug non fouler that matches the threads on your 02 sensor and itll do the same thing.
, lol
sorry