Trunk Lip Options (other than Rexspeed)
+1 evobros, been trying to get my hands on the rear visor here in Aus for some time. But Mitsubishi will ask for limbs or organs as payment. There is only one other evo 7 GT-A driving around with one that I know of
Iv had the Type C wing that Sgtseanzie has on his, for a black and white theme it looked ok, but with my fail offset it didnt really set it off, if that makes sence ?
At the moment im using Oem wing, with a carbon blade insert. Will probably look at doing a bobtail type one in the near future
Iv had the Type C wing that Sgtseanzie has on his, for a black and white theme it looked ok, but with my fail offset it didnt really set it off, if that makes sence ?
At the moment im using Oem wing, with a carbon blade insert. Will probably look at doing a bobtail type one in the near future
lots of good options, I've had my eye on the Rexspeed Type-c for a bit now but given this thread Im not against any other options.
Like many others the type-c attracted me because I dont ahve to worry about filling the OEM wing holes and re-spraying my truck lid.
Like many others the type-c attracted me because I dont ahve to worry about filling the OEM wing holes and re-spraying my truck lid.
Type C looks like crap. that's not even a wing. it's a copy of a Varis part that is made to be used WITH a GT wing to help downforce. by itself it just looks terrible.
sorry to bring up a dead thread but i ordered an ebay e46 m3 lip from ebay and mines about 2 inches short on each side.........

is there anything special i should search in ebay? i typed in "e46 m3 lip" and bought 1 from a "top rated seller" any suggestions? i know you could get 1 that fits because evobros, evowner17, and evo9fanatic all have ones that fit.

is there anything special i should search in ebay? i typed in "e46 m3 lip" and bought 1 from a "top rated seller" any suggestions? i know you could get 1 that fits because evobros, evowner17, and evo9fanatic all have ones that fit.








