Progress on the Evo
#1
Evolving Member
Thread Starter
iTrader: (5)
Join Date: Mar 2010
Location: Ga
Posts: 126
Likes: 0
Received 0 Likes
on
0 Posts
Progress on the Evo
The car is coming along motor is finally out of the machine shop cant wait to have it running. More pics and progress to follow....
(motor)
Built 2.0
Eagle Crank
Wiseco HD pistons 86.5mm pistons (.40 over)
Eagle Rods
Cosworth rods/main bearings
ARP Main and head studs
5 angle valve job
GSC S2 Cams
Fidanza Gears
Dual valve springs/retainers
STM Oil Cooler
(exhaust/intake)
Billet 6765 .82ar
Full Race Manifold
JMF Intercooler Piping
ETS 3.5" Cooler
Drivetrain
5spd Shep Tranny
Exedy Triple
Fuel
1000cc injectors
single 255
tuning
stock ecu
Stock Intake mani and throttle body
I deffinately will have another fuel pump in it before it gets tuned
09/13
UPDATE 09/30
UPDATE 10/02
UPDATE 10/06
10/12/10
Fired it up tonight, just have to tighty up a few things and its good to roll.
Im gonna put about 1500miles on it before I get it dialed in, more vids and pics to come.
EDIT:First 2 pics are Vids just click them
(motor)
Built 2.0
Eagle Crank
Wiseco HD pistons 86.5mm pistons (.40 over)
Eagle Rods
Cosworth rods/main bearings
ARP Main and head studs
5 angle valve job
GSC S2 Cams
Fidanza Gears
Dual valve springs/retainers
STM Oil Cooler
(exhaust/intake)
Billet 6765 .82ar
Full Race Manifold
JMF Intercooler Piping
ETS 3.5" Cooler
Drivetrain
5spd Shep Tranny
Exedy Triple
Fuel
1000cc injectors
single 255
tuning
stock ecu
Stock Intake mani and throttle body
I deffinately will have another fuel pump in it before it gets tuned
09/13
UPDATE 09/30
UPDATE 10/02
UPDATE 10/06
10/12/10
Fired it up tonight, just have to tighty up a few things and its good to roll.
Im gonna put about 1500miles on it before I get it dialed in, more vids and pics to come.
EDIT:First 2 pics are Vids just click them
Last edited by Mark14; Oct 12, 2010 at 08:17 PM.