Notices
Evo General Discuss any generalized technical Evo related topics that may not fit into the other forums. Please do not post tech and rumor threads here.
Sponsored by: RavSpec - JDM Wheels Central

blue smoke at high rpm shift???

Thread Tools
 
Search this Thread
 
Old Sep 20, 2010 | 06:48 PM
  #1  
white_evo27's Avatar
Thread Starter
Evolving Member
iTrader: (1)
 
Joined: Mar 2007
Posts: 398
Likes: 0
From: NJ
blue smoke at high rpm shift???

today when i pulled out of my driveway and punched through 1st gear i looked behind and saw a puff of smoke come out my exhaust with a blueish tint to it... i know black is running rich and blue is oil, but this only happened once, and i havent seen the blue smoke except for that one time... is it weird that i pulled through the gears a couple times and it magically disappeared? my evo is an 03 and has a decent chunk of miles on it roughly 7x,xxx miles... this is on a FP Black setup that is only 1 month old and has about 3,000 miles on it now... any suggestions? possible valve seal or headgasket leak?

im hoping this was a one time thing and nothing serious
Reply
Old Sep 20, 2010 | 07:10 PM
  #2  
white_evo27's Avatar
Thread Starter
Evolving Member
iTrader: (1)
 
Joined: Mar 2007
Posts: 398
Likes: 0
From: NJ
checked my oil and everything is good... slightly confused? anything else i could check?
Reply
Old Sep 20, 2010 | 07:53 PM
  #3  
white_evo27's Avatar
Thread Starter
Evolving Member
iTrader: (1)
 
Joined: Mar 2007
Posts: 398
Likes: 0
From: NJ
anyone?
Reply
Old Sep 20, 2010 | 07:57 PM
  #4  
SyZyGy1394's Avatar
Evolved Member
iTrader: (4)
 
Joined: Nov 2006
Posts: 1,441
Likes: 3
From: INDIANA FOO!
could be the turbo...you never know
Reply
Old Sep 20, 2010 | 07:57 PM
  #5  
blkmkIII's Avatar
Evolved Member
iTrader: (34)
 
Joined: Apr 2007
Posts: 953
Likes: 0
From: long island
id suggest having someone else drive your car. have them get on it and you look at the color yourself.
Reply
Old Sep 20, 2010 | 08:24 PM
  #6  
pwrofturbo's Avatar
Evolved Member
15 Year Member
Photogenic
iTrader: (2)
 
Joined: Nov 2006
Posts: 997
Likes: 2
From: Dallas
Valve guide, piston ring, or turbo oil seal are the most likely causes.

Also: was your car at full operating temperature when you floored it?
Reply
Old Sep 20, 2010 | 09:13 PM
  #7  
blownevo's Avatar
Evolving Member
iTrader: (1)
 
Joined: Dec 2008
Posts: 253
Likes: 0
From: TX
Blown head gasket?
Reply
Old Sep 20, 2010 | 09:37 PM
  #8  
MechTech's Avatar
Evolving Member
 
Joined: Jul 2010
Posts: 474
Likes: 0
From: The Depths
Originally Posted by pwrofturbo
Valve guide, piston ring, or turbo oil seal are the most likely causes.

Also: was your car at full operating temperature when you floored it?
This is the proper question.
Reply
Old Sep 20, 2010 | 10:22 PM
  #9  
sgounaro's Avatar
Newbie
iTrader: (3)
 
Joined: May 2007
Posts: 49
Likes: 0
From: New York
Hi are you running a catch can piped back to the intake?
Reply
Old Sep 20, 2010 | 11:37 PM
  #10  
white_evo27's Avatar
Thread Starter
Evolving Member
iTrader: (1)
 
Joined: Mar 2007
Posts: 398
Likes: 0
From: NJ
Originally Posted by MechTech
This is the proper question.
to be honest now i cant remember if it was fully warmed up... can someone explain what the difference? just curious..
Reply
Old Sep 20, 2010 | 11:38 PM
  #11  
white_evo27's Avatar
Thread Starter
Evolving Member
iTrader: (1)
 
Joined: Mar 2007
Posts: 398
Likes: 0
From: NJ
Originally Posted by sgounaro
Hi are you running a catch can piped back to the intake?

i dont have a catch can... my intake is blocked off and im running a breather filter
Reply
Old Sep 21, 2010 | 08:30 AM
  #12  
Bassicfun's Avatar
Evolved Member
iTrader: (10)
 
Joined: Dec 2009
Posts: 756
Likes: 1
From: Mid Ohio
Originally Posted by MechTech
This is the proper question.
+2

General reason is that the metals are not up to temperature yet, meaning they have yet to expand to full size (remember metal expands when heated) this would allow oil in the crankcase also to possibly blow by the rings, into the chamber, combust and out the exhaust, likely that once the car warmed up this was sealed enough to not allow blow by.

What I have understood about turbo cars is that it is a reasonable/smart idea to stay out of boost (stay in vacuum) until the engine is up to full operating temperature. This is what I do for my 96k+ evo, and I just had the engine oil analyzed with great results. It helps living on a mile or so country road, I poke out of my driveway down the road, and never put my foot down until I am a good few miles away, and have been up to operating water (and oil) temperatures before going into boost at all... takes discipline [/lecture]
Reply
Old Sep 21, 2010 | 08:40 AM
  #13  
heel2toe's Avatar
Evolved Member
iTrader: (41)
 
Joined: Jul 2007
Posts: 4,690
Likes: 128
From: Massachusetts
Originally Posted by Bassicfun
+2

General reason is that the metals are not up to temperature yet, meaning they have yet to expand to full size (remember metal expands when heated) this would allow oil in the crankcase also to possibly blow by the rings, into the chamber, combust and out the exhaust, likely that once the car warmed up this was sealed enough to not allow blow by.

What I have understood about turbo cars is that it is a reasonable/smart idea to stay out of boost (stay in vacuum) until the engine is up to full operating temperature. This is what I do for my 96k+ evo, and I just had the engine oil analyzed with great results. It helps living on a mile or so country road, I poke out of my driveway down the road, and never put my foot down until I am a good few miles away, and have been up to operating water (and oil) temperatures before going into boost at all... takes discipline [/lecture]
^Read it and learn it

Please do not beat on your car when it is not warmed up...if you treat her nice she will too in return.
Reply
Old Sep 21, 2010 | 09:07 AM
  #14  
01 Trans-Am WS6's Avatar
Evolving Member
iTrader: (2)
 
Joined: Jun 2009
Posts: 136
Likes: 0
From: Poconos
Originally Posted by Bassicfun
+2

General reason is that the metals are not up to temperature yet, meaning they have yet to expand to full size (remember metal expands when heated) this would allow oil in the crankcase also to possibly blow by the rings, into the chamber, combust and out the exhaust, likely that once the car warmed up this was sealed enough to not allow blow by.

What I have understood about turbo cars is that it is a reasonable/smart idea to stay out of boost (stay in vacuum) until the engine is up to full operating temperature. This is what I do for my 96k+ evo, and I just had the engine oil analyzed with great results. It helps living on a mile or so country road, I poke out of my driveway down the road, and never put my foot down until I am a good few miles away, and have been up to operating water (and oil) temperatures before going into boost at all... takes discipline [/lecture]


Agreed 100%, this is the proper way a turbo car should be driven.
Reply
Old Sep 21, 2010 | 09:08 AM
  #15  
05evoGSR's Avatar
Evolving Member
iTrader: (6)
 
Joined: Oct 2004
Posts: 496
Likes: 0
From: Central Jersey
Think of driving your car like trying to please a woman. You don't just jump in there go at it full throttle, you need to warm her up before you mash the pedal in the carpet
Reply



All times are GMT -7. The time now is 03:44 AM.