Is any one of you all running a zeitronix Zr-2 multi guage? (boost) The reason im asking is becuase i have one set up and its reading my AFR/EGT properly but it wont read my boost. it just say -25.5 all the time. How do i get it to read boost? Do i have to splice some wires with the ecu to the zeitronix control unit or do i have hook up a boost/vac line?

Here is the unit i have:
http://www.zeitronix.com/Products/ZR-2/ZR-2.shtml

 

Based on that PDF you only need to connect the cable in the daisy chain.

 

Yea that how I have it set up now but it still doesnt read it. Thats why after i pluged it up and took it for a test everything was working perfectly beside the boost meter. it just sits on -25.5. Im guessing i have to splice something but before i go and do that i want to see if anyone else had this problem at first and what they did to fix the issue.

 

Email zeitronix. Ive only had to issues(software) with them in my many years of zeitronix usage and they replied back to me rather quickly with resolution or suggestion.

 

Rog. ill email them.