Looking to re-line my headliner in a black suede or something along those lines. May try to do it myself but really dont know.. I know they are a pain to remove but I was wondering if I could get some opinions from ya guys. Thanks, Mike.

 

Really simple to remove! Just fold seats all the way down and remove through the rear door. Its tight... but really no problem at all!! If you do it yourself, take your time and pay great attention to detail. Last thing you want is the material to start to sag in the heat

PS
Use good high temp glue such as super 90 from 3m

 

Thanks! Yeah I used to work at a dealerships and they were a pain to get out on minivans.. but I have some scratches and dirt on mine so I figured relining it black would look best.

 

Does the headliner come out all in one piece? Is it just clipped in? The whole car is clips I feel like haha

 

the headliner comes out in one peice, after you remove most of the interior trim peices. I was never able to actualy remove the headliner from the board its glued on really freaking good. so i just used headline [black] with foam back and 3m Spray adhesive over it. USE ALOT OF ADHEASIVE, thats the one thing i could say. Spray half of the peice first, work from the middle out then do the other side. the edges need the most spray keep that in mind. Very easy to do.

 

So glue, glue, glue. Sounds pretty easy now i wanna do something fancy on it

 

what type of 3 m didyou use ?