I tried moving my low beams up a little so they would actually light up the road and not just 10 ft in front of the car. I used the 10mm screw that is behind the white plastic cover. Now, my passenger side adjustment motor moves the light up and down a little when the headlights are on. If I turn the switch from 0 to 1 then back to 0, it will sometimes stop. I tried moving the lights down a little, thinking I had reached the end of adjustment in the screw, but that didn't help. I only notice the light moving, if I'm sitting still, but I don't want to burn the motor out from it moving all of the time, or break something else. Has anyone run into this issue or have an idea?