Hi Evo rev heads!

Got an AGP can for my Evo 9. I know where the actual can fits above the engine mount but which hose goes where? Have a top and bottom hose, nothing on the web I can find anywhere!

Thanks In Advance

Jason

 

the vent hose from the valve cover should go to one side, then then next hose should go to the intake

 

Need visuals just to be certain is it here and here in the attached image? Plus the hose at the top goes to the valve cover and the one on the bottom goes to the intake? It would have to, to pass the filter I guess.

 

Bump!

 

Or should it be like this? Confusing really why does the weapon r attach in a different place to the AGP? Sorry for all the newb questions.

http://www.evomoto.com/article_image.../step_155.jpeg

 

They sell dual catch cans so that you can hook up the rear pcv valve as well, but if you just have a single can then usually alot guys just hook it up to the intake, just like the second link, to keep the gunk out of most of the intake tract

 

like in the weapon r pic above the top hose to the valve cover and the bottom hose to the nub on the bottom of the intake pipe

 

Hoses won't reach there if you mount the can above the enGine mount? Which is the best place for single catch can?

 

somewhere on the drivers side, kinda hidden but with the ability to reach it to drain the catch can

 

I'm going to hit between 400-450hp so should I catch on the turbo or intake side? Cams springs MAP EF3, mani, tbe, DW 1000cc, DW 300+, E85.

 

Bump!

 

Anyone have advice about which side?

 

You can bypass the pcv and install a breather on the side of the valve cover, this is how I have my Weapon R and it works great.