I recently purchases my evo 9 and i'm slowly going through it and making the changes that I want. Along the way i've found a few upgraded surprises that I didn't know the car had.

I was in the process of changing the hvac lights to match the gauge cluster and found that I had a works short shifter. I'm curious as to if these shifter plate bushings are aftermarket or stock though. Any help would be greatly appreciated. They are rubber though, so i'm guessing they are stock.

 

those are terrible pics

usually aftermarket are two solid pieces, one for between the chassis and the shifter housing, the other for between the shifter housing and the top of the bolt

 

Those are aftermarket pieces. The factory bushings are solid rubber, and they don't come out as easily as the two piece.

 

This is the top bushing where the bolt and washer go into the shifter plate. Ill have to check again and see if there are the same type of bushings under the plate/chassis mounting points. Also, these are very flexible.

 

Those look like aftermarket of some kind. The oem ones are definitely one piece (rubber). I had to use a flat head to pop mine out, they were wedged in there lol