Dirty_Evo

Im trying to decide if I am going to need more fuel to hit my goal.
Current relevant mods:
FUEL IS E85
-PTE 6262
-Weisco 1400 pistons
-Brian Crower H beam rods
-HKS 280 cams
-ETS 3 inch intercooler
-TIAL BOV and WG
-Full Race Manifold
-Hypertune Intake/TB/Fuel rail
-Fuel Lab Fuel pressure Regulator
-Grimmspeed 3 port Boost Controller
-Precision 1200cc injectors
-Aeromotive 340 pump
-ARP Main/ Head/ Exhaust Manifold Studs

Soon to have
-Spoolin up COP

Goal is 650ish on a Boositn Performance's mustang dyno
NEED ADVICE

Raptord

iTrader: (10)

I'm not an expert on fuel needs especially for E85, but from what I've seen I highly doubt 1200cc is enough for 650 on E85.

Dirty_Evo

I am 100% prepared to buy ID 2000's if necessary. Will the pump support that power though??

ReaperX

iTrader: (5)

Over 500-550 on e85 is double pumper territory.

Evo_Precision

I agree with both of the statements above. On E85 1200 CC are not going to be enough for the power you are looking for. Also, if you want to be making 650 you are going to need a double pump setup (anything over high 500's pretty much requires it).