Notices
Evo General Discuss any generalized technical Evo related topics that may not fit into the other forums. Please do not post tech and rumor threads here.
Sponsored by: RavSpec - JDM Wheels Central

help! launch control

Thread Tools
 
Search this Thread
 
Old Nov 22, 2013 | 07:24 PM
  #1  
Boss777's Avatar
Thread Starter
Newbie
 
Joined: Nov 2013
Posts: 24
Likes: 0
From: usa
help! launch control

Never mind it misfire on every gear after the boost kicks in at
4k you can feel that there is misfire or shorts the fuel jumps and just won't go I got Spoolinup coils, problem with cables coils or spark plugs? And if it's wires where do I get them? Car ran good before never had misfire pulled hard no problems.








Ignore----------------------------
I reset the check engine light and my lunch launch control seems to be on, I'm running different cams bigger fuel pump and injectors.
when I step on it on it on any gear it seems like it's misfire and one really go after 4k how do i turn the launch control of?

Last edited by Boss777; Nov 23, 2013 at 03:58 PM.
Reply
Old Nov 22, 2013 | 07:28 PM
  #2  
hiboost2.0's Avatar
Evolved Member
iTrader: (15)
 
Joined: Oct 2010
Posts: 641
Likes: 4
From: NJ
The rpm does not rise above 4k rpm? Are you sure that's where it's set to? I'm pretty sure stock it's set to 5k rpm and it's dependent on your speed sensor. It will only engage when the speed sensor reads 0
Reply
Old Nov 22, 2013 | 07:49 PM
  #3  
Boss777's Avatar
Thread Starter
Newbie
 
Joined: Nov 2013
Posts: 24
Likes: 0
From: usa
Originally Posted by hiboost2.0
The rpm does not rise above 4k rpm? Are you sure that's where it's set to? I'm pretty sure stock it's set to 5k rpm and it's dependent on your speed sensor. It will only engage when the speed sensor reads 0

Launch control is 5k when I start car my car launch control goes on it only happens when I reset check engine light ecu

Last edited by Boss777; Nov 22, 2013 at 09:22 PM.
Reply
Old Nov 22, 2013 | 07:52 PM
  #4  
feautoevo's Avatar
Evolving Member
iTrader: (8)
 
Joined: Dec 2004
Posts: 248
Likes: 1
I know my lunch control is off when everyone in the office is all like.. hey lets go get Mexican buffet!! and I'm like.. yeaah lets do it!
Reply
Old Nov 22, 2013 | 07:53 PM
  #5  
AndyCT9W's Avatar
Evolved Member
 
Joined: May 2011
Posts: 964
Likes: 0
From: New Zealand
Why would you want to turn lunch control off? It sounds delicious.

To turn off the factory launch control you need to pull your ROM from your ECU, use ECUFlash to adjust it to above your RPM limit. A useful note, it may also be called stationery rev limit.

However, I don't think that is the problem. Have you had your car tuned after those modifications were installed?
Reply
Old Nov 22, 2013 | 08:10 PM
  #6  
Boss777's Avatar
Thread Starter
Newbie
 
Joined: Nov 2013
Posts: 24
Likes: 0
From: usa
Originally Posted by AndyCT9W
Why would you want to turn lunch control off? It sounds delicious.

To turn off the factory launch control you need to pull your ROM from your ECU, use ECUFlash to adjust it to above your RPM limit. A useful note, it may also be called stationery rev limit.

However, I don't think that is the problem. Have you had your car tuned after those modifications were installed?
Well my car runs good but when I reset ecu with obd2 for some reason activates my launch control then I don't remember what I did one time and it was disabled all was good but I just did it again

Last edited by Boss777; Nov 22, 2013 at 09:22 PM.
Reply
Old Nov 22, 2013 | 08:35 PM
  #7  
silverevo05's Avatar
Evolved Member
iTrader: (7)
 
Joined: Nov 2004
Posts: 798
Likes: 9
From: So CAL
Some people need lunch control

Reply
Old Nov 22, 2013 | 09:05 PM
  #8  
AndyCT9W's Avatar
Evolved Member
 
Joined: May 2011
Posts: 964
Likes: 0
From: New Zealand
Originally Posted by Boss777
Well my car runs good but when I reset ecu with obd2 for some reason activates my lunch control then I don't remember what I did one time and it was disabled all was good but I just did it again
What is the code that you are resetting?
Reply
Old Nov 22, 2013 | 10:02 PM
  #9  
whotippedmycow's Avatar
Evolving Member
iTrader: (4)
 
Joined: Mar 2011
Posts: 179
Likes: 1
From: Ramstein, Germany
I would open ECUFlash and see what your Stationary rev limit is set to (thats your 2-Step) and your rev limit is set to.
Reply
Old Nov 22, 2013 | 10:39 PM
  #10  
Yang_2012's Avatar
Newbie
 
Joined: Oct 2013
Posts: 18
Likes: 0
From: Sacramento
Originally Posted by feautoevo
I know my lunch control is off when everyone in the office is all like.. hey lets go get Mexican buffet!! and I'm like.. yeaah lets do it!
{thum bup}
Reply
Old Nov 23, 2013 | 10:06 AM
  #11  
Boss777's Avatar
Thread Starter
Newbie
 
Joined: Nov 2013
Posts: 24
Likes: 0
From: usa
Does any one know how disable launch control?
i have alarm start and it disables clutch so my clutch is always in for alarm engine start maybe that is the case but it was working fine with that before

Last edited by Boss777; Nov 23, 2013 at 11:41 AM.
Reply
Old Nov 23, 2013 | 03:21 PM
  #12  
Boss777's Avatar
Thread Starter
Newbie
 
Joined: Nov 2013
Posts: 24
Likes: 0
From: usa
Update
Reply
Old Nov 24, 2013 | 11:00 AM
  #13  
Boss777's Avatar
Thread Starter
Newbie
 
Joined: Nov 2013
Posts: 24
Likes: 0
From: usa
Sometimes I step on it and it cuts everything for like half second and then kicks back in hard scares me cpuld it be fuel pump? Walboro 255 is bad?
Reply
Old Nov 24, 2013 | 11:57 AM
  #14  
Evo5madness's Avatar
Evolving Member
 
Joined: Apr 2013
Posts: 109
Likes: 0
From: culverden, New Zealand
Jesus m8 get a tune!! It least it wont kill any one if its strapped down to a dyno. Sounds dangerous and not just you at risk. Dyno guys will solve all your issues and save ur car
Reply
Old Nov 24, 2013 | 01:51 PM
  #15  
Boss777's Avatar
Thread Starter
Newbie
 
Joined: Nov 2013
Posts: 24
Likes: 0
From: usa
Originally Posted by Evo5madness
Jesus m8 get a tune!! It least it wont kill any one if its strapped down to a dyno. Sounds dangerous and not just you at risk. Dyno guys will solve all your issues and save ur car
It was tuned just not sure if ecu has to flashed or fuel pump is not good
Reply



All times are GMT -7. The time now is 06:02 AM.