Bolsen's Guage cluster light mod ROCKS!
looks like they have some LEDs with 360 degree viewing angle there. That could be awesome for soldering in place in either the temp or gauge cluster.
That carbon fiber cover is almost awesome, but I'd like it better in matt black
okay, i just finished Bolsen's gauge mod (quick, easy, and fun for a newbie), but i was a little disappointed with the results. Yeah, it's a little brighter, but not like "an STi" like some have been saying. Maybe it's just because it's the middle of the day, I'll look tonight.
HELP!!!
So I did this light mod on the weekend. Also I was doing something extra which required me to remove the needles. I removed the needles using two flat head screw drivers and they came off nicely. After I put them back in and put the cluster back in when I start my car the needles don't read properly. For example my temp gauge sits at the bottom when off, like it should, but when I start the car (COLD) the gauge needle goes up to just below the middle and goes up from there as the car warms up. Same with my fuel gauge, I only have about half a tank but it reads at almost full when the gauges are on. Again, when off both sit at the bottom as before. Any ideas to what could be wrong? Someone once said something about resetting the needles, is that something I'm missing?
Thanks.
So I did this light mod on the weekend. Also I was doing something extra which required me to remove the needles. I removed the needles using two flat head screw drivers and they came off nicely. After I put them back in and put the cluster back in when I start my car the needles don't read properly. For example my temp gauge sits at the bottom when off, like it should, but when I start the car (COLD) the gauge needle goes up to just below the middle and goes up from there as the car warms up. Same with my fuel gauge, I only have about half a tank but it reads at almost full when the gauges are on. Again, when off both sit at the bottom as before. Any ideas to what could be wrong? Someone once said something about resetting the needles, is that something I'm missing?
Thanks.
HELP!!!
So I did this light mod on the weekend. Also I was doing something extra which required me to remove the needles. I removed the needles using two flat head screw drivers and they came off nicely. After I put them back in and put the cluster back in when I start my car the needles don't read properly. For example my temp gauge sits at the bottom when off, like it should, but when I start the car (COLD) the gauge needle goes up to just below the middle and goes up from there as the car warms up. Same with my fuel gauge, I only have about half a tank but it reads at almost full when the gauges are on. Again, when off both sit at the bottom as before. Any ideas to what could be wrong? Someone once said something about resetting the needles, is that something I'm missing?
Thanks.
So I did this light mod on the weekend. Also I was doing something extra which required me to remove the needles. I removed the needles using two flat head screw drivers and they came off nicely. After I put them back in and put the cluster back in when I start my car the needles don't read properly. For example my temp gauge sits at the bottom when off, like it should, but when I start the car (COLD) the gauge needle goes up to just below the middle and goes up from there as the car warms up. Same with my fuel gauge, I only have about half a tank but it reads at almost full when the gauges are on. Again, when off both sit at the bottom as before. Any ideas to what could be wrong? Someone once said something about resetting the needles, is that something I'm missing?
Thanks.
when I did this I started my car and let it run until it was a normal operating temp. took note of my gas reading, tach reading and adjusted when I put them back on. as far as the speedo I had one of those radar speed contraptions by my house and just took it to 25mph and pinned the needle on. worked just fine. of course I wouldn't do this on my car now, that was 5yrs ago.
Evolved Member
Joined: Aug 2008
Posts: 1,387
Likes: 3
From: riverside, ca
great write up took me about 45mins to an hour to do partly cuz i have a column pod with boost and wideband in it, but had a problem before with dim odometer bulb problem gone now thanks and didnt even use a new red condum or red paint looks good
