Notices
Evo How To Requests / Questions / Tips If you're looking for a how-to on something, ask in here.

New Stereo with Premium Sound

Thread Tools
 
Search this Thread
 
Old Jul 26, 2005 | 08:21 AM
  #1  
CoolDog's Avatar
Thread Starter
Newbie
 
Joined: Apr 2005
Posts: 10
Likes: 0
From: Valparaiso, IN
New Stereo with Premium Sound

Well, I am a little disappointed that the premium sound option didn't have a head unit that can play MP3's so, I am looking at replacing it. Has anyone else replaced their head units in their Evo's that had the Sun and Sound package option?

My primary concern is the factory amp. I'd like to do a little rigging as possible to put in a head unit to interface with the existing system. I had helped my brother install a stereo in his M3 and due to the factory amp, it was a pain (double amping issues etc.). I'd like to avoid all that if possible.

So, my question boils down to this. If anyone has replaced the head unit on the sun&sound package, were you able to "plug and play" with your replacement, or did you end up putting in signal converters etc. I am kind of partial to the Alpine units but I'd like to know what units you guys used if they went in easy. I really do not have a whole lot of time that I can spend on an installation and I do not trust most installation shops around where I live.

Thanks in advance.
Reply
Old Jul 26, 2005 | 11:20 AM
  #2  
Kronik's Avatar
Evolved Member
iTrader: (3)
 
Joined: Nov 2004
Posts: 709
Likes: 0
From: Northern, KY
All you need to do is get a harness. I picked mine up at the local Circuit City and it was a 2 second job...plug and play baby...
Reply
Old Sep 24, 2005 | 12:53 PM
  #3  
lexat20's Avatar
Evolved Member
iTrader: (24)
 
Joined: Mar 2005
Posts: 2,017
Likes: 1
From: thrillville, IL
Is this true that there is a harness that works with the SSl package?
Reply
Old Oct 31, 2005 | 06:06 AM
  #4  
davemattb's Avatar
Newbie
 
Joined: Oct 2005
Posts: 13
Likes: 0
From: Flagstaff, AZ
I actually have this same question--- I dont think you can just buy a harness thats plug and play-- The crutchfield website says that for the 6 speaker lancers you can just plug but the 7 speaker setup you have to run new speaker wires and the factory sub wont work. I wish the sound package wasnt in with the SSL package. All I want is an aux input on the front for my ipod. Anybody done this and have maybe help b/c I also dont want to be re-running wires all over the place. Thanks
Reply
Old Oct 31, 2005 | 06:17 AM
  #5  
lexat20's Avatar
Evolved Member
iTrader: (24)
 
Joined: Mar 2005
Posts: 2,017
Likes: 1
From: thrillville, IL
there is a harnes to keep the factory amp search and you will find the link to buy the harness.
Reply
Old Nov 25, 2005 | 03:44 PM
  #6  
o2thag's Avatar
Evolved Member
iTrader: (2)
 
Joined: Jan 2004
Posts: 539
Likes: 0
From: Alberta, Canada
Did anyone find that link?
Reply
Old Nov 25, 2005 | 04:55 PM
  #7  
J8dailo's Avatar
Evolved Member
iTrader: (33)
 
Joined: Sep 2004
Posts: 1,626
Likes: 0
From: Chi-Town
the harness from circuit city works..the thing is...your sub won't sound as loud... i immediately noticed louder bass from the sub once i switched back to stock setup
Reply
Old Dec 4, 2005 | 05:55 PM
  #8  
JGo's Avatar
JGo
Newbie
 
Joined: Nov 2005
Posts: 15
Likes: 0
From: Lakewood, CO
Question

I need to bump this thread.
I just bought an VIII with the sun/sound option and now I'm preparing to get an ipod-ready HU. The sony/crutchfield website states that replacing the unit on a 7-speaker setup will disable the sub..and that the speakers have to be rewired.
i'm ok at doing installs, but would rather not...but i would like to know more info on this topic...
what are my options? i guess i would like to keep the factory amp and wiring...

thanks!
Reply
Old Dec 4, 2005 | 08:20 PM
  #9  
Mass EvoVIII's Avatar
Newbie
 
Joined: May 2005
Posts: 30
Likes: 0
From: Boston, MA
the copmany that makes the interface is called soundgate I believe and it goes into preout and connects to the factory amp w/o any problems. hope that helps
Reply
Old Dec 4, 2005 | 08:32 PM
  #10  
jjm4life's Avatar
Evolved Member
iTrader: (14)
 
Joined: May 2005
Posts: 1,729
Likes: 0
From: boston
soundgate does make an interface its like 25 bucks. the shop i went to just ended up cutting the harness and wiring it without having to get the adapter. i wanted to get the adapter but they insisted it wasnt worth it and cutting the wires would work just as well, and it sounds pretty good, better than the stock headunit
Reply
Old Dec 4, 2005 | 09:27 PM
  #11  
JGo's Avatar
JGo
Newbie
 
Joined: Nov 2005
Posts: 15
Likes: 0
From: Lakewood, CO
thx for the info mass...found this thread on it as well, after reading your post:
https://www.evolutionm.net/forums/sh...27#post2159627

so jjm, your unit is still going through the amp? does the sub still work?
i think i might just go with the adapter to keep it "clean"...
also, has anyone else installed this adapter from soundgate?...and what kind of quality have you noticed? diminished? same? better?
Reply
Old Dec 5, 2005 | 08:23 AM
  #12  
o2thag's Avatar
Evolved Member
iTrader: (2)
 
Joined: Jan 2004
Posts: 539
Likes: 0
From: Alberta, Canada
i have a Lancer Ralliart with S&S package and have replaced the stock HU. The adapter that I used is made my metra their site is metraonline.com the part # is 70-7003. The best is to call them and find out if there are any dealers in your area that carry that part. This I think is the way to go if you wanna keep your stock amp/speakers/sub. Plus I've noticed that it sounds much clearer with the aftermarket HU.
Reply
Old Dec 5, 2005 | 08:28 AM
  #13  
JGo's Avatar
JGo
Newbie
 
Joined: Nov 2005
Posts: 15
Likes: 0
From: Lakewood, CO
sweet, thanks a lot guys.
Reply
Old Dec 5, 2005 | 08:46 AM
  #14  
Mass EvoVIII's Avatar
Newbie
 
Joined: May 2005
Posts: 30
Likes: 0
From: Boston, MA
sound

The sound was crampy at first but I changed to a deck with high preamp outputs 4-5v and made a huge difference in sound quality. I used the soundgate and the wire harness with great results and the factory sub does work..
Reply
Old Dec 5, 2005 | 08:57 AM
  #15  
evo4g63awd's Avatar
Evolved Member
iTrader: (1)
 
Joined: Aug 2005
Posts: 848
Likes: 0
From: Elgin
you can just use the general mitsu harnes wire it up and go from there, but you will loose quality. its obviously going to be a lot better if you rewire and replace everything else. but your factory stuff is set up so that its perfect for each other. your call from there if you want mp3s
Reply



All times are GMT -7. The time now is 01:55 AM.