Remove my headliner....??
#18
Evolving Member
iTrader: (26)
Join Date: Sep 2006
Location: Central NJ
Posts: 419
Likes: 0
Received 0 Likes
on
0 Posts
I also took mine out with both seats folded back out the front passenger door and used dupli color fabric and vinyl paint to paint my headliner and entire inside to match all black.
#20
#21
Evolved Member
iTrader: (5)
ok, this is kinda easy... First removed all the pillers. Next go for the sun visors, then the lighting thing. then the 3 clips in back and then the 3 handles... then it should have 6 clips, one behind each piller that hold it in after all the other stuff is removed... need any other help pm/im me.
#23
Evolving Member
iTrader: (9)
Join Date: Jan 2009
Location: Florida-Camp Pendleton,CA.
Posts: 132
Likes: 0
Received 0 Likes
on
0 Posts
Thanks i was wondering about this. I am glad to know that its only 6 clips and not the heap of clips most headliners that are out today.
Now what is the headliner board made of?
Now what is the headliner board made of?
#25
Newbie
iTrader: (1)
Join Date: Apr 2008
Location: Michigan
Posts: 97
Likes: 0
Received 0 Likes
on
0 Posts
ok, i am currently working on this project and i started it tonight. ive got everything un-done/hooked/whatever except for the visor holder with it clips to (not the actual visor) how do u get that out!
2nd question: how do i get the middle pillars out? the seat belt is hooked to it and i couldnt find a way to get that undone.
Please help me!
2nd question: how do i get the middle pillars out? the seat belt is hooked to it and i couldnt find a way to get that undone.
Please help me!
#26
Evolving Member
iTrader: (9)
Join Date: Jul 2009
Location: Exeter
Posts: 164
Likes: 0
Received 0 Likes
on
0 Posts
ok, i am currently working on this project and i started it tonight. ive got everything un-done/hooked/whatever except for the visor holder with it clips to (not the actual visor) how do u get that out!
2nd question: how do i get the middle pillars out? the seat belt is hooked to it and i couldnt find a way to get that undone.
Please help me!
2nd question: how do i get the middle pillars out? the seat belt is hooked to it and i couldnt find a way to get that undone.
Please help me!
I actually just finished doing this is the driveway. I had a leak somewhere and had to trace it down.
The visor clips are a pain without a tool that can slide under each side and squeeze to release. There has to be an easier way than how i just did it but in a pinch i used two screw drivers and pushed from either side untili could wedge out the clip.
As for the center pillar I took the bottom section off after removing the door sill runner(dont know the proper name right this moment). Then i popped off the front cover of the upper adjustable pivot on the seatbelt. I then removed the bolt (17mm i think but i just found what fit and didnt check) and there is a clip near the headliner. just pop that clip and the top will lean toward you as you can lift it out.
#30
Evolved Member
iTrader: (64)
Join Date: Feb 2008
Location: Charlotte,NC
Posts: 1,082
Likes: 0
Received 0 Likes
on
0 Posts
just got done with mine.. i do have some suede left over.. you only need 2 yards ussually comes 56 inches wide..
let me know if anyone wants it i have enough to do the headliner
let me know if anyone wants it i have enough to do the headliner