I have taken my drives door panel off in efforts to locate the wire that actuates the power lock for my door (drivers only) So far I have narrowed it down to a stip of three wires that run from the main harness to the motor. The colors are as follow:

Pink
Grey
Black

See attached picture,




What I am trying to accomplish is to locate the unlock wire and cut it in half to install a relay as per my alarm instructions to have a 2 step unlock. I have all the wiring info just need to identify one wire.... ekk

 

No pic.

 

Merry Christmas.

 

thank you !!! I couldnt find those pages on my manuals. But anyway I updated my post with pics.

 

okay, so I was targeting the wrong wire?
do i need to pick from E-04 rather than from E-01 ? and if so do you know which wire is the one I need?

 

Looks like E-04 to me E-01 is for the key cylinder if you open the car with your key and not the remote.Not positive so you might want some else's input.

 

yeah, i just dont want to start probing not to mention i dont have a volt meter with me.

 

okay, white wire seems to control the unlocking... tomorrow I will install the relay, I hope it works ...

 

Mods Sticky please =)