I have searched and searched for a good link on a how to install a elctronic boost controller. I have an 06 IX mr and jsut picked up a Greddy Profec-B Spec controller and need some help on the install if someone could help me out. It looks like there is a lot of mixed opinions on where to attach the vaccum lines and what nipples to cap off (wastegaste, turbo outlet)....Does anyone have a link for a good step by step...I really appreciate it...

 

...very easy install.

Read the manual first of all, pressure source use the nipple off the turbo that the factory line connects to, other line for wastegate actuator...secondary pressure source tap into your fpr line...run lines into car...red power, black ground...mount controller and tune it...

...again, easy install...only hard part is routing lines through firewall.