Hello,

Im just having a shop install my fuel pump, walbro 255lph #gss-342, and the tech called me and said the inlet and outlets are on different ends that they need to be on. I called the place where i purchased the pump and they said it was the correct part number.

So is there any trick to installing this, or did I get a mystery pump?

Any quick helpful advise would be GREAT!!!

Thanks.

 

evomoto.com has a tech site where it shows you how to install walbro fuel pump.

 

Make sure it is a 342. A 341 looks exactly the same but the lower port does not lay on the same axis as the top port. I know this from experience. The part number is stamp on the pump itself.

 

Moved to How To's and Requests..

 

It an easy install. Should be able to pop the old pump out and put the new one in.

 

ahahhah
I just did this damn install and didnt read the fu_king pump
I smell like gas...easy install except...
getting that stupid metal ring...damn...

 

Ok,,,, package says 342,,,,,,,,,,, pump stamp say 341!!!!!!

Simply mispackaged.

You can close this if you like. Thanks

 

I just had this SAME exact problem, they sent me a 341 and the bottom port does not line up at all and the damn filter gets in the way.

 

I did mine yesterday - took me 20 minutes. The trick is to remove all the hoses from the barbs and rotate the ring around about half a turn. Remove the whole assembly from the passenger side of the car by turning it anti-clockwise.

 

how does the car drive with the Walbro 255 , but not tuned

 

drives the same , but the car will run rich

http://www.evomoto.com/tech_info.php...3_13&tech_id=9

 

"20 mins" So a first timer could do this in 20 min flat? I am depating on if i want to do it or not....

 

Telling me... Nobody told me I was sposed to keep the tank empty... Half the driveway was covered in gasoline and my buddy kept on smoking 5 feet from it... It was a fun night...

 

It's pretty easy if you know what you're doing. If you don't....HERE YA GO!!!!

http://www.evomoto.com/tech_info.php...3_13&tech_id=9

 

That looks like a little bit more then 20min of work.... I just installed an MR DV tonight and it took me about 30min cause the damn radiator hose is in the way.