i have read that cash beam is made in-house

ah i stand corrected.

a crash beam's a crash beam tho. lol

https://www.evolutionm.net/forums/sh...2&postcount=13

cause i found this funny

Hey man, this helped alot as i went to put the brace on and noticed that the plate lights were way too low. Thank god for the SEARCH function.... Looks good except the muffler sticks too far out so a little welding and some shortning ill be set....

will post pic when done....

Does anyone have a source or part number for the bumper support bracket that you have to removed from the stock bumper and put on the JDM bumper?

I don't want to give my stock bumper an abortion and would prefer to just buy a new bracket.

If found this but not sure what all is needed:
http://www.japanparts.com/images/Ima...base=1&no=1571

pics back up

thank you again

thank you Jakeg97, without your pics it would have taken a lot longer to do the swap!

i have an hks exhaust on my evo right now..i know that if i were to put the jdm rear bumper on, the exhaust would stick out more, but is there going to be any issues putting the bumper on leaving the exhaust the way it is? (without any cutting of the exhaust or bumper)

stock crash beam can be modified and reinstall...we can do it in the shop

Agreed. I'm waiting for the JDM bumper to arrive and the crash beam is ready to go.

dope write up man

Hi , I just put a evo 9 rear jdm bumper on you dont have to lose the crash bar you just have to modify the stock one.If you cut off the mounting braket from the crash bar and weld thick washer to the inside of the holes on the crash bar it bolts right back on almost 1.5 inches closer to the body.I have photos of how, but I dont know how to post pics.Im new to the sight so if some one cold explain how .

Not very good pics...Need to back up and show us what ur doing