Very Nice!

 

I cannot loosen the bolt worth a lick to remove the steering wheel. Anyone have info on how?

 

That bolt has locktite on it from the factory - it took me a cheater pipe to get enough leverage on that bolt...even then it was tight! Just gotta put your elbow into it.

 

I think I put a hernia into it last night. I put PB blaster (Very Lightly) and will try again tonight if my back doesnt give out I'm not as young as I use to be

 

YEAHHHHHHHHHHHHHHHHHHHHHHH I got it

Now how do I know what the center is to put the steering wheel in??????

 

i installed mine a few months ago, however i just cant get the horn to stay connected, the wires get tangled up after a few full lock turns every time i un-do them. this makes me want to sell the set up

 

Pretty sure I stripped the 8mm bolt holding the wheel to the column.. Used PB blaster for a good 15-20 min soak before I tried to remove it too... Bought the car used and it seemed as though there was a bit of play with the 8mm Allen but I didn't think it'd strip...

Any insight on what I can do to get it off? =\

 

Try to find a friend/mechanic that has this: http://www.amazon.com/pc-Head-Multi-.../dp/B002Q5NB80

Or you can buy it yourself. Look up "hex screw extractor".

 

great write up !!!!!

 

great write up. Just not sure I would want to risk not having an airbag for the little bit of looks it gives you. IMO

 

I have two questions...

1) can i just use the nrg quick release system or would i have to buy the short hub too?

2) can i still use our regular steering wheel with the quick release? I have the evo 8 and i just wanna see what it feels like..i DO plan on getting a deep dish momo mod 7 but for now i wanna Get feel for how close i will be to the steering wheel

Thanks and great thread

 

Tagged for future info

 

Just fyi, if the steering wheel airbag is set up like the seat airbags, a 2 ohm resistor will fix the SRS light.

 

Great write up!!!! Its a huge help. Now I can put on the momo steering wheel collecting dust in the closet!

 

thanks for the great write up! not a fan of the new wheel but definitely a fan of your explanation =]